User Guide

3-5
Chapter 3: General Instruction
4. Image
You can adjust Sharpness, Trace Free, Aspect Control, ASCR, Position
(VGA only), and Focus (VGA only) from this menu.
MX259
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
Sharpness 60
60
Full
OFF
Trace Free
Aspect Control
ASCR
Position
Focus
Blue Light Filter
• Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100.
• Trace Free: Use this function to speed up the response time by
Over Drive technology. The adjusting range is from lower 0 to
faster 100.
• Aspect Control: adjust the aspect ratio to full, 4:3 or
OverScan.
• 4:3 is only available when input source is in 4:3 format.
• OverScan is only available for the HDMI input source.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Position: Adjust the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
• Focus: Reduce the Horizonal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.