ASUS Desktop PC BT6130 User Manual
E7375 First Edition April 2012 Copyright © 2012 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Contents Notices ........................................................................................................... 4 Safety information........................................................................................... 7 Conventions used in this guide....................................................................... 8 Where to find more information...................................................................... 8 Package contents.................................................
Notices REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules.
RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
ENERGY STAR ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 15 and 30 minutes of user inactivity.
Safety information Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few drops of warm water then remove any extra moisture with a dry cloth. • • • • • • • • • • • • • DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when completing a task. CAUTION: Information to prevent damage to the components when completing a task. IMPORTANT: Instructions you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
Package contents Check your system package for the following items. Standard items 1. ASUS Desktop PC with • ASUS Desktop x1 • Mouse x1 • Keyboard x1 2. Cables 3. Accessories 4. DVD • Power cord x1 • 5. Mouse pad x1 • Support DVD x1 • Recovery DVD x1 Documentation • QIG x1 • Warranty card x1 If any of the above items is damaged or missing, contact your retailer immediately. Optional items 1. Optical disk drive (ODD) 2. Memory card reader 3. LAN cable 4.
Chapter 1 Getting started Welcome! Thank you for purchasing the ASUS Desktop PC! The ASUS Desktop PC provides cutting-edge performance, uncompromised reliability, and user-centric utilities. All these values are encapsulated in a stunningly futuristic and stylish system casing. Read the ASUS Warranty Card before setting up your ASUS Desktop PC. Getting to know your computer Illustrations are for reference only. The ports and their locations, and the chassis color vary with different models.
Front panel ENGLISH 2 1 3 4 Front USB 2.0 port 10 Front USB 2.0 port 9 5 6 7 1. Slim ODD. This bay is for a slim size optical drive. 2. Power button. Press this button to turn the system on. 3. Headphone port. This Line In (lime) port connects a headphone with a stereo miniplug. 4. Microphone port. This Mic (pink) port connects a microphone. 5. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports are available for connecting USB 2.
ENGLISH Rear panel 13 12 1 Rear USB 2.0 port 5 Rear USB 2.0 port 6 11 2 3 1 4 5 Rear USB 2.0 port 1 Rear USB 2.0 port 4 USB 3.0 port 1 USB 3.0 port 2 6 10 9 8 7 Do NOT cover the rear vent , and the ambient temperature is limited up to 35oC to prevent the system from overheating. 1. USB 2.0 ports 1 ~ 4. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 2. HDMI port.
ENGLISH • USB 3.0 devices can only be used as data storage only. • We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices. 5. Microphone port (pink). This port connects a microphone. 6. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel, 6channel, and 8-channel configurations, the function of this port becomes Front Speaker Out. 7. Line In port (light blue).
Setting up your computer ENGLISH This section guides you through connecting the main hardware devices, such as the external monitor, keyboard, mouse, and power cord, to your computer. Using the onboard display output ports Connect your monitor to the onboard display output port. To connect an external monitor using the onboard display output ports: 1. Connect your monitor to the VGA port, DVI-D port, or display port of your computer. 2. Plug your monitor to a power source.
Connecting a USB keyboard and a USB mouse ENGLISH Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer. C Connecting the power cord Connect one end of the power cord to the power connector on the rear panel of your computer and the other end to a power source.
Turning your computer ON/OFF ENGLISH This section describes how to turn on/off your computer after setting up your computer. Turning your computer ON To turn your computer ON: 1. Turn your monitor ON. 2. Press the power button on your computer. Power button 3. Wait until the operating system loads automatically. Turning your computer OFF To turn your computer OFF: 1. Close all running applications. 2. Click 3. Click ASUS BT6130 on the Windows® desktop. to shut down the operating system.
ENGLISH 18 Chapter 1: Getting started
Chapter 2 ENGLISH Using Windows® 7 Starting for the first time When you start your computer for the first time, a series of screens appear to guide you in configuring the basic settings of your Windows® 7 operating system. To start for the first time: 1. Turn your computer on. Wait for a few minutes until the Set Up Windows screen appears. 2. From the dropdown list, select your language then click Next. 3.
Using Windows® 7 desktop ENGLISH Click the Start icon > Help and Support to obtain more information about Windows® 7. Using the Start menu The Start menu gives you access to programs, utilities, and other useful items on your computer. It also provides you with more information about Windows 7 through its Help and Support feature. Launching items from the Start menu To launch items from the Start menu: 1. From the Windows® taskbar, click the Start icon . 2.
Pinning items on the jump lists ENGLISH When you right-click an icon on the taskbar, a jump list launches to provide you with quickaccess to the program’s or item’s related links.You may pin items on the jump list such as favorite websites, often-visited folders or drives, or recently played media files. To pin items to the jump list: 1. From the taskbar, right-click an icon. 2. From the jump list, right-click the item that you want to pin, then select Pin to this list.
Using the notification area ENGLISH By default, the notification area shows these three icons: Action Center notification Click this icon to display all the alert messages/notifications and launch the Windows® Action Center. Network connection This icon displays the connection status and signal strength of the wired or wireless network connection. Volume Click this icon to adjust the volume.
Managing your files and folders ENGLISH Using Windows® Explorer Windows® Explorer allows you to view, manage, and organize your files and folders. Launching Windows® Explorer To launch Windows Explorer: 1. From the Windows® taskbar, click the Start icon 2. Click Computer to launch Windows Explorer. to launch the Start menu. Exploring files and folders To explore files and folders: 1. Launch Windows Explorer. 2. From the navigation or view pane, browse for the location of your data. 3.
Sorting your files ENGLISH To sort your files: 1. Launch Windows Explorer. 2. Right-click anywhere on the View pane. 3. From the menu that appears, select Sort by, then select your preferred sorting type. Grouping your files To group your files: 1. Launch Windows Explorer. 2. Right-click anywhere on the View pane. 3. From the menu that appears, select Group by, then select your preferred grouping type. Adding a new folder To add a new folder: 1. Launch Windows Explorer. 2.
Restoring your system ENGLISH The Windows® System Restore feature creates a restore point where the computer’s system settings are stored at certain time and date. It allows you to restore or undo changes to your computer’s system settings without affecting your personal data. To restore your system: 1. Close all running applications. 2. Click 3. Follow the onscreen instructions to complete the process. > All Programs > Accessories > System Tools > System Restore.
Setting up a user account and password ENGLISH You may create user accounts and passwords for people who will use your computer. Setting up a user account To set up a user account: > Getting Started > Add new users. 1. From the Windows® taskbar, click 2. Select Manage another account. 3. Select Create a new account. 4. Key in the name of the new user. 5. Select either Standard user or Administrator as the user type. 6. When done, click Create Account.
Activating the anti-virus software ENGLISH Trend Micro Internet Security is pre-installed on your computer. It is a third-party anti-virus software protecting your computer from virus attacking. It is purchased separately. You have a 30-day trial period after activating it. To activate Trend Micro Internet Security: 1. Run the Trend Micro Internet Security application. 2. Carefully read the license terms. Click Agree & Activate. 3. Input your e-mail address and select your location. Click Next. 4.
ENGLISH 28 Chapter 2: Using Windows® 7
Chapter 3 ENGLISH Connecting devices to your computer Connecting a USB storage device This desktop PC provides USB 2.0/1.1 ports on both the front and rear panels, USB 3.0 ports on the rear panel. The USB ports allow you to connect USB devices such as storage devices. To connect a USB storage device: Insert the USB storage device to your computer.
Using the memory card reader ENGLISH Digital cameras and other digital imaging devices use memory cards to store digital picture or media files. The built-in memory card reader on the front panel of your system allows you to read from and write to different memory card drives. To use the memory card: 1. Insert the memory card into the card slot. • A memory card is keyed so that it fits in only one direction. DO NOT force a card into a slot to avoid damaging the card.
Connecting microphone and speakers ENGLISH This desktop PC comes with microphone ports and speaker ports on both the front and rear panels. The audio I/O ports located on the rear panel allow you to connect 2-channel, 4-channel, 6-channel, and 8-channel stereo speakers.
Connecting 2-channel Speakers ENGLISH Connecting 4-channel Speakers 32 Chapter 3: Connecting devices to your computer
ENGLISH Connecting 6-channel Speakers Connecting 8-channel Speakers ASUS BT6130 33
ENGLISH 34 Chapter 3: Connecting devices to your computer
Chapter 4 ENGLISH Using your computer Proper posture when using your Desktop PC When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical discomfort and possible injury while using and fully enjoying your Desktop PC.
Using the optical drive (on selected models only) ENGLISH 1 3 2 Inserting an optical disc To insert an optical disc: 1. While your system is on, press the eject button in the drive bay cover to open the tray. 2. Place the disc to the optical drive with the label side facing up. 3. Push the tray to close it. 4. Select a program from the AutoPlay window to access your files.
Configuring the USB ports using the BIOS ENGLISH You can enable or disable the front and rear USB 2.0 and USB 3.0 ports from the BIOS Setup. To disable or enable the USB 3.0 ports: 1. Press to enter the BIOS Setup at startup. 2. From the BIOS Setup screen, click Advanced > Onboard Device Configuration. 3. Select USB 3.0 port1 or USB 3.0 port2. 4. Press to enable or disable the selected USB port. 5. Click Exit and select Save Changes & Reset to save the changes made.
To disable or enable the USB 2.0 ports: ENGLISH 1. Press to enter the BIOS Setup at startup. 2. From the BIOS Setup screen, click Advanced > PCH Configuration > USB Configuration. 3. Select the USB port that you want to enable or disable. 4. Press to enable or disable the selected USB port. 5. Click Exit and select Save Changes & Reset to save the changes made. Refer to Chapter 1 for the locations of the front and rear USB 2.0 ports.
Chapter 5 ENGLISH Connecting to the Internet Wired connection Use a RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN). Connecting via a DSL/cable modem To connect via a DSL/cable modem: 1. Set up your DSL/cable modem. Refer to the documentation that came with your DSL/cable modem. 2. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to a DSL/cable modem. Modem RJ-45 cable 3.
Connecting via a local area network (LAN) ENGLISH To connect via a LAN: 1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your computer and the other end to your LAN. RJ-45 cable 2. Turn on your computer. 3. Configure the necessary Internet connection settings. LAN Contact your network administrator for details or assistance in setting up your Internet connection.
Chapter 6 ENGLISH Using the utilities The Support DVD and Recovery DVD may not be included in the package. You may use the Recovery Partition feature to create the Support DVD and Recovery DVD. ASUS AI Suite II ASUS AI Suite II is an all-in-one interface that integrates several ASUS utilities and allows users to launch and operate these utilities simultaneously. Installing AI Suite II To install AI Suite II: 1. Place the support DVD in the optical drive.
The Tool menu ENGLISH The Tool menu includes the EPU, Probe II, and Sensor Recorder panels. Launching EPU EPU is an energy-efficient tool that provides you with a total power-saving solution. It detects the current loading and intelligently adjusts the power usage in real-time. When you select the Auto mode, the system changes modes automatically according to the current system status.
Launching and configuring Probe II ENGLISH Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition. To launch Probe II: Click� Tool > Probe II on the AI Suite II main menu bar.
Launching and configuring Sensor Recorder ENGLISH Sensor Recorder allows you to monitor the changes in the system voltage, temperature, and fan speed, as well as recording the changes. To launch Sensor Recorder: Click Tool > Sensor Recorder on the AI Suite II main menu bar. To configure Sensor Recorder: • Click the Voltage/Temperature/Fan Speed tabs and select the sensors that you want to monitor. • The History Record tab allows you to record the changes in the sensors that you enable.
The Monitor menu ENGLISH The Monitor menu includes the Sensor and CPU Frequency panels. Launching Sensor The Sensor panel ������������������������������������������������������������������������ displays the current value of a system sensor such as fan rotation, CPU temperature, and voltages. To launch Sensor: Click Monitor > Sensor on the AI Suite II main menu bar.
ENGLISH Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 1. From the ASUS Update screen, select Update BIOS from file, then click Next. 2. Locate the BIOS file from the Open window, click Open, and click Next. 3. Click Yes if you want to change the boot logo, which is the image appearing on screen during the Power‑On Self-Tests (POST).������������������ Otherwise, click No. 4. Follow the onscreen instructions to complete the update process.
ASUS AI Manager ENGLISH ASUS AI Manager is a utility which gives you quick and easy access to frequently-used applications. Installing AI Manager To install AI Manager: 1. Place the support DVD in the optical drive. If Autorun is enabled, the Drivers installation wizard appears. If Autorun is disabled, double-click the setup.exe file from the ASUS AI Manager folder in the support DVD. 2. Click the Utilities tab, then click ASUS AI Manager. 3.
AI Manager quick bar ENGLISH The AI Manager quick bar saves the desktop space and allows you to launch the ASUS utilities or display system information easily. Click any of the Main, My Favorites, Support or Information tab to display the menu’s contents. Exit button Switch to main Window Add to ToolBar Click to extend or restore Main Support My Favorites Information Click the Maximize/restore button to switch between full window and quick bar.
AI Booting 1. 2. ENGLISH AI Booting allows you to specify the boot device priority sequence. To specify the boot sequence: Select a device, then click the left/right button to specify the boot sequence. When done, press Apply. My Favorites My Favorites allows you to add applications that you frequently use, saving you from searching for the applications throughout your computer. To add an application: 1. Click Add, then locate the application you want to add to My Favorites. 2.
ASUS Secure Delete ENGLISH ASUS Secure Delete makes deleted files completely irrecoverable via a simple drag-anddrop interface, thus protecting your data security. To use ASUS Secure Delete: 1. 2. 50 Do either of the following to launch ASUS Secure Delete: • Click the ASUS Secure Delete shortcut on the Windows® desktop, • Click Start > All Programs > ASUS > ASUS Secure Delete. Do any of the following to add files to the deletion box: • Drag and drop the files to the deletion box.
Click Clear, and then click OK on the confirmation message to permanently delete all the files listed in the deletion box and the recycle bin (if selected in step 3). ENGLISH 5. Recovering your system Using the system recovery partition The system recovery partition quickly restores your Desktop PC’s software to its original working state.
Using the Recovery DVD (on selected models) ENGLISH Remove the external hard disk drive before performing system recovery on your Desktop PC. According to Microsoft, you may lose important data because of setting up Windows on the wrong disk drive or formatting the incorrect drive partition. To use the Recovery DVD: 1. Insert the Recovery DVD into the optical drive. Your Desktop PC needs to be powered ON. 2.
Chapter 7 ENGLISH Troubleshooting Troubleshooting This chapter presents some problems you might encounter and the possible solutions. ? ? My computer cannot be powered on and the power LED on the front panel does not light up • Check if your computer is properly connected. • Check if the wall outlet is functioning. • Check if the Power Supply Unit is switched on. Refer to the section Turning your computer ON/OFF in Chapter 1. My computer hangs.
? ENGLISH ? ? ? No display on the monitor. • Check if the monitor is powered on. • Ensure that your monitor is properly connected to the video output port on your computer. • If your computer comes with a discrete graphics card, ensure that you connect your monitor to a video output port on the discrete graphics card. • Check if any of the pins on the monitor video connector is bent. If you discover bent pins, replace the monitor video connector cable.
The picture on the HDTV is stretched. • It is caused by the different resolutions of your monitor and your HDTV. Adjust the screen resolution to fit your HDTV. To change the screen resolution: 1. ENGLISH ? Do any of the following to open the Screen Resolution setting screen: • C lick > Control Panel > Appearance and Personalization > Display > Change display settings. • Right click anywhere on your Windows desktop.
Power ENGLISH Problem No power (The power indicator is off) Possible Cause Action Incorrect power voltage • S et your computer’s power voltage switch to your area’s power requirements. • Adjust the voltage settings. Ensure that the power cord is unplugged from the power outlet. Your computer is not turned on. Press the power key on the front panel to ensure that your computer is turned on. Your computer’s power cord is not properly connected.
LAN Cannot access the Internet Possible Cause Action LAN cable problems Ensure the LAN LED is on. If not, try another LAN cable. If it still does not work, contact the ASUS service center. The LAN cable is not connected. Your computer is not properly connected to a router or hub. Connect the LAN cable to your computer. ENGLISH Problem Ensure that your computer is properly connected to a router or hub. Network settings Contact your Internet Service Provider (ISP) for the correct LAN settings.
System ENGLISH Problem System speed is too slow The system often hangs or freezes. 58 Possible Cause Too many programs are running. Action Close some of the programs. Computer virus attack • U se an anti-virus software to scan for viruses and repair your computer. • Reinstall the operating system. Hard disk drive failure • Send the damaged hard disk drive to ASUS Service Center for servicing. • Replace with a new hard disk drive.
Problem Too noisy right after turning on the computer. Computer is too noisy when in use. Possible Cause Action Your computer is booting up. It is normal. The fan runs on its full speed when the computer is powering on. The fan slows down after entering the OS. The BIOS settings have been changed. Restore the BIOS to its default settings. Old BIOS version Update the BIOS to the latest version. Visit the ASUS Support site at http://support.asus.com to download the latest BIOS versions.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax E-mail Web site Technical Support Telephone Online support 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 +886-2-2894-3447 +886-2-2890-7798 info@asus.com.tw www.asus.com.tw +86-21-38429911 support.asus.
