E1670 ® Quick Start Guide
Front panel features NOTE. The illustrations in this guide are for reference only. For detailed information on your system’s specifications, refer to the user guide.
Rear panel features DC In socket DC Out socket VGA port PS/2 keyboard port DVI port Secondary IDE connector USB ports PS/2 mouse port Gigabit LAN port Ethernet LAN port Video In port Cable TV connector HDTV/TV port Mic port Line Out port Line In port Antenna port Internal components 1. Standby power LED 2. HDD power plug (to HDD power connector) 3. IDE cable (to HDD connector) 4. Chassis fan 5. CPU fan 6. DIMM sockets 7. HDD metal tray 8.
Removing the top cover 2 1 3 Installing a hard disk drive 2 1 Hand slot 5 3 Disengage the side hooks from the HDD tray and optical drive shield Slide the metal cover toward the rear panel 4 Insert the tray metal tacks into the drive screw holes (two on the side and two at the bottom) 7 4 6 Align the side hooks with the tray rail and optical drive shield.
Installing a CPU 1 2 3 Disconnect the CPU fan cable 6 Remove the bracket screw 4 Disconnect the chassis fan cable 5 9 7 8 Unlock the socket by pressing the lever sideways then lifting it up to a 90° angle Re-install the chassis fan and heatsink assembly CAUTION! Make sure that the gold mark on the CPU matches the base of the socket lever. The CPU fits only in one correct orientation.
Installing a DIMM 2 1 1 Press the retaining clips outward Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket Firmly insert the DIMM to the socket until the retaining clips snap back in place and the DIMM is properly seated. 3 3 CAUTION! A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.
Connecting cables Power adapter and cable Radio antenna Antenna port 3 DC in power plug 2 1 Power adapter DC in socket Power cable Power outlet Audio/Video cable Audio out cable 1 Audio/Video cable plug S-Video port 2 HDTV cable HDTV cable plug 1 2 Audio I/O ports Video out cable 1 HDTV port 2 HDTV RCA input ports NOTE. You may also connect a regular TV set using the HDTV cable by connecting the blue jack to the video input port of the TV set.
Connecting external devices To the front panel Audio Devices HDD Mic — VOLUME + Camera Headphone Scanner To the rear panel Line In Line Out Mic DiGiMatrix subsystem 8 Cable TV VGA DVI RJ-45 PS/2 Mouse USB Mouse PS/2 KB Quick Start Guide
