User manual

14
ASUS Storage DS300f, DS300i Quick Start Guide
2. Connect the FC transceiver on the ASUS Storage DS300f controller to the
Host PC or Server.
See also “SAS JBOD Expansion” on page 25.
Management Path
The ASUS Storage DS300f controller has one (1) Ethernet RJ-45 Management
Port connector. See page 14, Figure 10.
To establish the management path:
1. Attach one end of an Ethernet cable to the network connector or standard
NIC in the Host PC.
Attach the other end of the Ethernet cable to one of the ports on the standard
network switch.
See page 15, Figure 11.
2. Attach one end of an Ethernet cable to one of the ports on the standard
network switch.
Attach the other end of the Ethernet cable to the Management Port on the
ASUS Storage DS300f subsystem.
If you have multiple DS300f subsystems, Host PCs or Servers, repeat steps
1 and 2 as required.
Figure 10. ASUS Storage D300f data and management ports
iSCSI data port 2
iSCSI data port 1
Management port
FC data port 1
FC data port 2
SAS Expansion
port (to DS300j)