User manual

5
Task 2: Installing the LCD Panel (Optional)
Task 2: Installing the LCD Panel (Optional)
Cautions
The LCD panel is NOT a hot-swap device. Be sure the ASUS
Storage is powered down before you connect or disconnect
the LCD panel.
You must install the LCD panel before you mount the ASUS
Storage subsystem in a rack.
The LCD panel mounts to the left ear of the ASUS Storage enclosure.
1. Align the connector on the left bracket of the ASUS Storage enclosure to the
connector on the back of the LCD panel, as shown in Figure 4.
Figure 4. Align the connectors on the enclosure and the LCD panel
Connector on
the enclosure
Connector on
the LCD panel
2. Insert the two screws that you removed in step 1 through the holes in the left
bracket and into the threaded holes in the LCD panel, as shown in page 6,
Figure 5.
Tighten the screws to secure the LCD panel to the bracket.