User's Manual

4-244-24
4-244-24
4-24
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
Legacy USB Support [Enabled]Legacy USB Support [Enabled]
Legacy USB Support [Enabled]Legacy USB Support [Enabled]
Legacy USB Support [Enabled]
Allows you to enable or disable support for USB devices on legacy
operating systems (OS). Setting to [Enabled] allows the system to detect
the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. if no USB device is detected, the legacy USB
support is disabled. Configuration options: [Disabled] [Enabled]
F1:Help
↑↑
↑↑
↑
↓ ↓
↓ ↓
↓ : Select Item -/+: Change Value F9: Setup Defaults
ESC: Exit
→← →←
→← →←
→←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Item Specific Help
Peripheral Devices Configuration
Serial port A [Enabled]
Base I/O address [378]
Interrupt [IRQ 4]
Serial port B [Enabled]
Mode [Normal]
Base I/O address [2F8]
Interrupt [IRQ 3]
Parallel port [Enabled]
Base I/O address [378]
Interrupt [IRQ 7]
Mode [ECP]
DMA channel [DMA 3]
Floppy disk controller [Enabled]
PhoenixBIOS Setup Utility
Advanced
4.4.54.4.5
4.4.54.4.5
4.4.5
Peripheral Devices ConfigurationPeripheral Devices Configuration
Peripheral Devices ConfigurationPeripheral Devices Configuration
Peripheral Devices Configuration
This menu shows the peripheral devices configuration settings. Select an
item then press <Enter> to display the configuration options.
Serial port A [Enabled]Serial port A [Enabled]
Serial port A [Enabled]Serial port A [Enabled]
Serial port A [Enabled]
Allows you to configure serial port A.
Configuration options: [Disabled] [Enabled]
Base I/O address [378]Base I/O address [378]
Base I/O address [378]Base I/O address [378]
Base I/O address [378]
Allows you to select the base I/O address for serial port A.
Configuration options: [3F8] [2F8] [3E8] [2E8]
Interrupt [IRQ 4]Interrupt [IRQ 4]
Interrupt [IRQ 4]Interrupt [IRQ 4]
Interrupt [IRQ 4]
Allows you to set the interrupt for serial port A.
Configuration options: [IRQ 3] [IRQ 4]
Serial port B [Enabled]Serial port B [Enabled]
Serial port B [Enabled]Serial port B [Enabled]
Serial port B [Enabled]
Allows you to configure serial port B.
Configuration options: [Disabled] [Enabled]