User's Manual

ASUS DSBF-D SeriesASUS DSBF-D Series

ASUS DSBF-D Series

4-314-31

4-31

The following items appear only if you set the

Com Port AddressCom Port Address

Com Port Address

item to [On-board COM A] or [On-board COM B].

Baud Rate [9600]Baud Rate [9600]

Baud Rate [9600]

Allows you to enable the specified baud rate.

Configuration options: [300] [1200] [2400] [9600] [19.2K] [38.4K]

[57.6K] [115.2K]

Console Type [PC-ANSI, 7bit]Console Type [PC-ANSI, 7bit]

Console Type [PC-ANSI, 7bit]

Allows you to enable the specified console type.

Configuration options: [VT100] [VT100, 8bit] [PC-ANSI, 7bit] [PC-ANSI]

[VT100+] [VT-UTF8] [ASCII]

Flow Control [CTS/RTS]Flow Control [CTS/RTS]

Flow Control [CTS/RTS]

Allows you to select the flow control for console redirection.

Configuration options: [None] [XON/XOFF] [CTS/RTS]

Console Connection [Direct]Console Connection [Direct]

Console Connection [Direct]

Allows you to select the console connection. [Direct] indicates that the

console is connected directed to the system. [Via modem] indicates that a

modem is used to connect. Configuration options: [Direct] [Via modem]

Continue C.R. after POST [Off]Continue C.R. after POST [Off]

Continue C.R. after POST [Off]

Set this item to [On] if you want console redirection to continue after the

operating system has loaded. Configuration options: [Off] [On]

# of video pages to support [1]# of video pages to support [1]

# of video pages to support [1]

Allows you to set the number of video pages to allocate for console

redirection when the video hardware is not available. Press <-> or <+> to

set the value, or enter the value using the numeric keypad. Configuration

options: [1] ~ [8]