User's Manual

4-344-34
4-344-34
4-34
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
2. In the
Enter current passwordEnter current password
Enter current passwordEnter current password
Enter current password field, type in your current
password. Press <Enter>.
3. The cursor moves to the next field,
Enter new passwordEnter new password
Enter new passwordEnter new password
Enter new password.
Press <Enter>. Do not type anything in this field.
4. The cursor moves to the next field,
Confirm new passwordConfirm new password
Confirm new passwordConfirm new password
Confirm new password.
Press <Enter>. Do not type anything in this field.
5. When the confirmation message “Password has been changed”
appears, press <Enter>.
The display returns to the
Security Security
Security Security
Security menu. Note that the password
field on top is changed to
ClearClear
ClearClear
Clear.
A note about passwordsA note about passwords
A note about passwordsA note about passwords
A note about passwords
The Supervisor password is required to enter the BIOS Setup program
preventing unauthorized access. The User password is required to
boot the system preventing unauthorized use.
Forgot your password?Forgot your password?
Forgot your password?Forgot your password?
Forgot your password?
If you forget your password, you can clear it by erasing the CMOS Real
Time Clock (RTC) RAM. The RAM data containing the password
information is powered by the onboard button cell battery. If you need
to erase the CMOS RAM, refer to section “2.6 Jumpers” for
instructions.
Password Check [Setup]Password Check [Setup]
Password Check [Setup]Password Check [Setup]
Password Check [Setup]
This field requires you to enter the password before entering the BIOS
setup or the system. Select [Setup] to require the password before
entering the BIOS Setup. Select [System] to require the password before
entering the system. Configuration options: [Setup] [System]
Password Lock Mode [Enabled]Password Lock Mode [Enabled]
Password Lock Mode [Enabled]Password Lock Mode [Enabled]
Password Lock Mode [Enabled]
When set to [Enabled], the keyboard is locked and the user has no privilege
to launch the BIOS setup utility when installing adapter cards during option
ROM initialization. Configuration options: [Disabled] [Enabled]
Removable Device Boot [Enabled]Removable Device Boot [Enabled]
Removable Device Boot [Enabled]Removable Device Boot [Enabled]
Removable Device Boot [Enabled]
Allows you to enable or disable booting from a legacy floppy, USB floppy,
or IDE optical drive. Configuration options: [Disabled] [Enabled]
Flash Write [Enabled]Flash Write [Enabled]
Flash Write [Enabled]Flash Write [Enabled]
Flash Write [Enabled]
Set this item to [Disabled] to write-protect the BIOS flash memory.
Configuration options: [Disabled] [Enabled]