User's Manual

4-364-36
4-364-36
4-36
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setupChapter 5: BIOS setup
Chapter 5: BIOS setup
F1:Help
↑↑
↑↑
↑
↓ ↓
↓ ↓
↓ : Select Item -/+: Change Value F9: Setup Defaults
ESC: Exit
→← →←
→← →←
→←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Item Specific Help
Allows the BIOS to skip
certain tests while
booting. This will
decrease the time needed
to boot the system.
Boot Features
Quick Boot [Enabled]
Full Logo Display [Enabled]
Bootup Num-Lock [On]
PS/2 Mouse [Auto Detect]
Summary screen [Enabled]
POST Errors [Enabled]
SETUP prompt [Enabled]
Interrupt 19 Capture [Enabled]
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit
4.7.24.7.2
4.7.24.7.2
4.7.2
Boot FeaturesBoot Features
Boot FeaturesBoot Features
Boot Features
Quick Boot [Enabled]Quick Boot [Enabled]
Quick Boot [Enabled]Quick Boot [Enabled]
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Full Logo Display [Enabled]Full Logo Display [Enabled]
Full Logo Display [Enabled]Full Logo Display [Enabled]
Full Logo Display [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
Bootup Num-Lock [On]Bootup Num-Lock [On]
Bootup Num-Lock [On]Bootup Num-Lock [On]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [Off] [On]
PS/2 Mouse [Auto Detect]PS/2 Mouse [Auto Detect]
PS/2 Mouse [Auto Detect]PS/2 Mouse [Auto Detect]
PS/2 Mouse [Auto Detect]
Allows you to enable or disable support for PS/2 mouse.
Configuration options: [Disabled] [Enabled] [Auto Detect]
Summary screen [Enabled]Summary screen [Enabled]
Summary screen [Enabled]Summary screen [Enabled]
Summary screen [Enabled]
When this item is enabled, the system configuration is displayed during
POST. Configuration options: [Disabled] [Enabled]
POST Errors [Enabled]POST Errors [Enabled]
POST Errors [Enabled]POST Errors [Enabled]
POST Errors [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when
error occurs. Configuration options: [Disabled] [Enabled]