User's Manual

ASUS DSBF-D SeriesASUS DSBF-D Series
ASUS DSBF-D SeriesASUS DSBF-D Series
ASUS DSBF-D Series
4-374-37
4-374-37
4-37
SETUP prompt [Enabled]SETUP prompt [Enabled]
SETUP prompt [Enabled]SETUP prompt [Enabled]
SETUP prompt [Enabled]
When this item is set to Enabled, the system displays the message “Press
DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Enabled]Interrupt 19 Capture [Enabled]
Interrupt 19 Capture [Enabled]Interrupt 19 Capture [Enabled]
Interrupt 19 Capture [Enabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Configuration options: [Disabled] [Enabled]
F1:Help
↑↑
↑↑
↑
↓ ↓
↓ ↓
↓ : Select Item -/+: Change Values F9: Setup
Defaults ESC: Exit
→← →←
→← →←
→←: Select Menu Enter: Select Sub-menu
F10: Save and Exit
Item Specific Help
Save any changes to CMOS,
exit BIOS Setup then reboot
system.
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Setup Defaults
4.8 Exit menu
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit
Save Changes and ExitSave Changes and Exit
Save Changes and ExitSave Changes and Exit
Save Changes and Exit
Select this option then press <Enter>, or simply press <F10>, to save your
changes to CMOS before exiting the Setup utility.
When a confirmation window appears:
• select [Yes], then press <Enter> to save and exit.
• select [No], then press <Enter>, or simply press <Esc>, to cancel the
command and return to the Exit menu.
Discard Changes and ExitDiscard Changes and Exit
Discard Changes and ExitDiscard Changes and Exit
Discard Changes and Exit
Select this option then press <Enter> if you wish to exit the Setup utility
without saving your changes.
When a confirmation window appears:
• select [Yes], then press <Enter> to discard your changes and exit.
• select [No], then press <Enter>, or simply press <Esc>, to cancel the
command and return to the Exit menu.