User's Manual

ASUS DSBF-D SeriesASUS DSBF-D Series

ASUS DSBF-D Series

5-115-11

5-11

5.2.25.2.2

5.2.2

Creating a RAID 10 setCreating a RAID 10 set

Creating a RAID 10 set

You can create a RAID 10 set using four identical hard disk drives.

To create a RAID 10 set using the

Easy Configuration Easy Configuration

Easy Configuration option:

1. From the utility main menu, highlight

ConfigureConfigure

Configure, then press <Enter>.

2. Use the arrow keys to select

Easy ConfigurationEasy Configuration

Easy Configuration, then press <Enter>.

3. The

ARRAY SELECTION MENU ARRAY SELECTION MENU

ARRAY SELECTION MENU displays the available drives

connected to the SATA ports. Select the drive(s) you want to include

in the RAID set, then press <SpaceBar>. When selected, the drive

indicator changes from

READYREADY

READY to

ONLIN A[X]-[Y]ONLIN A[X]-[Y]

ONLIN A[X]-[Y], where X is the

array number, and Y is the drive number.

The information of the selected hard disk drive displays at the bottom of

the screen.