User's Manual

5-525-52

5-52

Chapter 5: RAID configurationChapter 5: RAID configuration

Chapter 5: RAID configuration

4. Use the arrow key to select the disk you would like to configure as hot

spare, then move the cursor to the Hot Spr column. Press <+>, <->,

or <Space>. The Drive Status column field now shows Hot Spare.

Press <C> to commit the changes.

Synchronizing the arraySynchronizing the array

Synchronizing the array

Synchronizing the array allows the utility to resynchronize data on the

mirrored disk in the array. This procedure is seldom required because data

synchronization is automatically done during normal operation.

To synchronize the array:

1. Follow steps 1 ~ 3 of the section “Viewing volume properties” and

step 2 of the section “Managing hot spares.”

2. From the Manage Array screen select

Synchronize SpareSynchronize Spare

Synchronize Spare, then

press <Enter>.

3. Press <Y> to begin the synchronization, or <N> to cancel.