User's Manual

2-242-24
2-242-24
2-24
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
5. Connect the fan cable to the
4-pin connector labeled
FB_DIMM1.
4. Position top cover over the fan
base. Insert the top cover legs
into the slot on the fan base
legs.
Push down carefully until the
legs are securely in place and
the top cover hooks snap in
place.
Make sure the cables pass
through the notch on the fan
base as shown.