User's Manual

ASUS DSBF-D SeriesASUS DSBF-D Series

ASUS DSBF-D Series

2-312-31

2-31

3.3.

USB device wake-up (3-pin USBPW12, USBPW34)USB device wake-up (3-pin USBPW12, USBPW34)

USB device wake-up (3-pin USBPW12, USBPW34)

Set these jumpers to +5V to wake up the computer from S1 sleep

mode (CPU stopped, DRAM refreshed, system running in low power

mode) using the connected USB devices. Set to +5VSB to wake up

from S4 sleep mode (no power to CPU, DRAM in slow refresh, power

supply in reduced power mode).

• The USB device wake-up feature requires a power supply that can

provide 500mA on the +5VSB lead for each USB port; otherwise, the

system will not power up.

• If you are using Windows

2000, you need to install Service Pack 4

to wake up the system from S4 sleep mode.

• The total current consumed must NOT exceed the power supply

capability (+5VSB) whether under normal condition or in sleep mode.

2.2.

LAN bandwidth setting (3-pin LAN_BW1)LAN bandwidth setting (3-pin LAN_BW1)

LAN bandwidth setting (3-pin LAN_BW1)

This jumper allows you to set the LAN bandwidth setting for more

efficient IP load distribution.

DSBF-D Series

DSBF-D Series LAN bandwidth setting

LAN_BW1

Balanced mode

(Default)

Centric mode

2312

DSBF-D Series

DSBF-D Series USB device wake up

USBPW12

(Default)

+5V +5VSB

USBPW34

(Default)

+5V +5VSB