User's Manual

2-342-34

2-34

Chapter 2: Hardware informationChapter 2: Hardware information

Chapter 2: Hardware information

8.8.

Onboard storage setting (3-pin SAS_EN1)Onboard storage setting (3-pin SAS_EN1)

Onboard storage setting (3-pin SAS_EN1)

(for DSBF-D/SAS model only)

This jumper allows you to enable or disable the onboard LSI1068 SAS

controller.

9.9.

Force BIOS recovery setting (3-pin RECOVERY1)Force BIOS recovery setting (3-pin RECOVERY1)

Force BIOS recovery setting (3-pin RECOVERY1)

This jumper allows you to quickly update or recover the BIOS settings

when it becomes corrupted.

To update the BIOS:

1. Prepare an emergent BIOS Recovery floppy disk which is created

via the support CD. Refer to 4.1.3 for details.

2. Set the jumper to pins 2-3.

3. Insert the floppy disk then turn on the system to update the

BIOS.

4. Shut down the system.

5. Set the jumper back to pins 1-2.

6. Turn on the system.

DSBF-D Series

DSBF-D Series BIOS recovery setting

RECOVERY1

(Default)

Normal BIOS Recovery

DSBF-D Series

DSBF-D Series SAS setting

SAS_EN1

12 23

Enable

(Default)

Disable