User's Manual

2-402-40

2-40

Chapter 2: Hardware informationChapter 2: Hardware information

Chapter 2: Hardware information

7.7.

Serial port connector (10-1 pin COM2)Serial port connector (10-1 pin COM2)

Serial port connector (10-1 pin COM2)

This connector is for a serial (COM) port. Connect the serial port

module cable to this connector, then install the module to a slot

opening at the back of the system chassis.

The serial port module is purchased separately.

6.6.

USB connector (10-1 pin USB34)USB connector (10-1 pin USB34)

USB connector (10-1 pin USB34)

This connector is for USB 2.0 ports. Connect the USB module cable to

this connector, then install the module to a slot opening at the back

of the system chassis. This USB connector complies with USB 2.0

specification that supports up to 480 Mbps connection speed.

The USB port module is purchased separately.

DSBF-D Series

DSBF-D Series Serial port connectors

PIN 1

COM2

DSBF-D Series

DSBF-D Series USB connector

USB34

Power

USB PortA(-)

USB PortA(+)

GND

Power

USB PortB(-)

USB PortB(+)

GND