User's Manual

ASUS DSBF-D SeriesASUS DSBF-D Series
ASUS DSBF-D SeriesASUS DSBF-D Series
ASUS DSBF-D Series
4-154-15
4-154-15
4-15
4.3.54.3.5
4.3.54.3.5
4.3.5
IDE Channel 0 Master/Slave;IDE Channel 0 Master/Slave;
IDE Channel 0 Master/Slave;IDE Channel 0 Master/Slave;
IDE Channel 0 Master/Slave;
SATA Port 1/2/3/4SATA Port 1/2/3/4
SATA Port 1/2/3/4SATA Port 1/2/3/4
SATA Port 1/2/3/4
F1:Help
↑↑
↑↑
↑
↓ ↓
↓ ↓
↓ : Select Item -/+: Change Values F9: Setup Defaults
ESC: Exit
→← →←
→← →←
→←: Select Menu Enter: Select Sub-menu F10: Save and Exit
PhoenixBIOS Setup Utility
Main
Item Specific Help
IDE Channel 0 Master
Type: [Auto]
Muti-Sector Transfers [Disabled]
LBA Mode Control [Disabled]
32-Bit I/O [Disabled]
Transfer Mode [Disabled]
Ultra DMA Mode [Disabled]
Type [Auto]Type [Auto]
Type [Auto]Type [Auto]
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic selection of
the appropriate IDE device type. Select [CD-ROM] if you are specifically
configuring a CD-ROM drive. Select [ATAPI Removable] if your device is
either a ZIP, LS-120, or MO drive. Select [User] to manually enter the
parameters of the device. Configuration options: [Auto] [User] [CD-ROM]
[ATAPI Removable]
Muti-Sector Transfers [Disabled]Muti-Sector Transfers [Disabled]
Muti-Sector Transfers [Disabled]Muti-Sector Transfers [Disabled]
Muti-Sector Transfers [Disabled]
Enables or disables data multi-sectors transfers. When set to Auto, the
data transfer from and to the device occurs multiple sectors at a time if
the device supports multi-sector transfer feature. When set to [Disabled],
the data transfer from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
LBA Mode Control [Disabled]LBA Mode Control [Disabled]
LBA Mode Control [Disabled]LBA Mode Control [Disabled]
LBA Mode Control [Disabled]
Enables or disables the LBA mode. Setting to Auto enables the LBA mode if
the device supports this mode, and if the device was not previously
formatted with LBA mode disabled. Configuration options: [Disabled]
[Auto]
32-Bit I/O [Disabled]32-Bit I/O [Disabled]
32-Bit I/O [Disabled]32-Bit I/O [Disabled]
32-Bit I/O [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]