User's Manual

ManualsBrandsAsus ManualsServer MotherboardsDSBF-D/SAS

100

ASUS DSBF-D SeriesASUS DSBF-D Series

ASUS DSBF-D Series

4-234-23

4-23

Palette Snooping [Disabled]Palette Snooping [Disabled]

Palette Snooping [Disabled]

When set to [Enabled], the palette snooping feature informs the PCI

devices that an ISA graphics device is installed in the system so that the

latter can function correctly. Configuration options: [Disabled] [Enabled]

Option ROM Placement [Disabled]Option ROM Placement [Disabled]

Option ROM Placement [Disabled]

This item allows you to disable or set the option ROM placement feature. If

the system hangs during boot, restart the system and enter BIOS setup to

change the setting. Configuration options: [Disabled] [E000 Extension by

PFA] Temporary location by PFA] [E000 Extension by Size] Temporary

location by Size]

F1:Help

↑↑

↑

↓ ↓

↓ : Select Item -/+: Change Value F9: Setup Defaults

ESC: Exit

→← →←

→←: Select Menu Enter: Select Sub-menu F10: Save and Exit

Item Specific Help

Control the listed USB

functions by setting the

item to the desired

value.

ICH USB Control Sub-Menu

USB - Device 29, All Functions [Enabled]

USB - Device 29, Function 7 [Enabled]

Legacy USB Support [Enabled]

PhoenixBIOS Setup Utility

Advanced

4.4.44.4.4

4.4.4

ICH USB Control Sub-MenuICH USB Control Sub-Menu

ICH USB Control Sub-Menu

The items in this menu allow you to display the USB configuration settings.

Select an item then press <Enter> to display the configuration options.

USB - Device 29, All Functions [Enabled]USB - Device 29, All Functions [Enabled]

USB - Device 29, All Functions [Enabled]

Configuration options: [Disabled] [Enabled]

The following items appear only if you enable the

USB - Device 29,USB - Device 29,

USB - Device 29,

All Functions All Functions

All Functions item.

USB - Device 29, Function 7 [Enabled]USB - Device 29, Function 7 [Enabled]

USB - Device 29, Function 7 [Enabled]

Allows you to enable or disable the USB 2.0 controller. Setting this item to

[Enabled] allows the built-in high speed USB support in the BIOS to turn on

automatically when you install high speed USB devices.

Configuration options: [Disabled] [Enabled]