User Manual

6-2
Chapter 6: Driver installation
For systems with Red Hat
®
Enterprise versions that are not listed in the
Makedisk menu, explore the support CD and copy the RAID driver disk from the
following path:
For Intel
®
6321 LSI MegaRAID: \Drivers\6321 LSI MegaRAID\Driver\Linux\
For LSI 1068 SAS: \Drivers\LSI 1068\Driver\Linux\
The paths above may differ based on variant models.
6. Place a blank, high-density oppy disk to the oppy disk drive, then select the
type of RAID driver disk you want to create by typing the number before the
option
7. Press <Enter>.
8. Follow screen instructions to create the driver disk.
6.1.2 Installing the RAID controller driver
Windows
®
2000/2003 Server OS
During Windows
®
2000/2003 Server OS installation
To install the RAID controller driver when installing Windows
®
2000/2003
Server OS:
1. Boot the computer using the Windows
®
2000/2003 Server installation CD.
The Windows
®
2000/2003 Setup starts.
2. Press <F6> when the message “Press F6 if you need to install a third party
SCSI or RAID driver...” appears at the bottom of the screen.
3. When prompted, press <S> to specify an additional device.