User’s Manual

ASUS DSBF-DM Series 2-29
4. LAN controller setting (3-pin LAN_EN1, LAN_EN3, LAN_EN4)
These jumpers allow you to enable or disable the onboard Intel
®
82563EB
Gigabit LAN controller and the onboard Intel
®
82573L Gigabit LAN controllers.
Set to pins 1-2 to activate the Gigabit LAN feature.
®
DSBF-DM Series
DSBF-DM Series LAN setting
LAN_EN1
LAN_EN3
LAN_EN4
1 2 2 3
Enable
(Default)
Disable
5. Fan control setting (3-pin CPUFAN_SET1, CHAFAN_SET1)
These jumpers allow you to switch for fan pin selection. The CPUFAN_SET1
jumper is for the CPU fans control and CHAFAN_SET1 is for the other fans
control including front fans, rear fans and FB-DIMM fans. Set to pins 1-2 for
4-pin fans or pins 2-3 for 3-pin fans.
®
DSBF-DM Series
DSBF-DM Series FAN setting
CPUFAN_SET1
CHAFAN_SET1
1 2 2 3
PWM FAN
(Default)
DC FAN
• If you use a 4-pin fan but set the jumper to pin 2-3, the fan you installed
may not work.
• If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan controll will
not work and the fan you installed will always run at full speed.
(82563EB)
(82573L)
(82573L)
(CPU Fan)
(Other Fans)