User’s Manual

ASUS DSBF-DM Series 4-13
4.3.5 IDE Primary Master/Slave;
SATA Port 1/2/3/4
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
→←
Select Menu Enter Select Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Main
Item Specic Help
IDE Primary Master
Type: [Auto]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
32-Bit I/O: [Disabled]
Transfer Mode: [Standard]
Ultra DMA Mode: [Disabled]
Type: [Auto]
Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the
appropriate IDE device type. Select [CD-ROM] if you are specically conguring a
CD-ROM drive. Select [ATAPI Removable] if your device is either a ZIP, LS-120,
or MO drive. Select [User] to manually enter the parameters of the device.
Conguration options: [Auto] [User] [Other ATAPI] [IDE Removable] [CD-ROM]
[ATAPI Removable] [None]
• Except for 32-Bit I/O item, the following items become user-congurable
when the
Type
item is not set to [Auto].
• Suggest you to keep the default setting of this item [Auto].
• For items that have no sub-menu, you have to use
-/+ for values changing.
Multi-Sector Transfers: [Disabled]
Specify the number of sectors per block for multiple sector transfers. When set to
[2~16 Sectors], the data transfer from and to the device occurs multiple sectors at
a time if the device supports multi-sector transfer feature. When set to [Disabled],
the data transfer from and to the device occurs one sector at a time.
Conguration options: [Disabled] [2 Sectors] [4 Sectors] [8 Sectors] [16 Sectors]
LBA Mode Control: [Disabled]
Enables or disables the LBA mode. Setting to [Enabled] enables the LBA mode if
the device supports this mode, and if the device was not previously formatted with
LBA mode disabled. Conguration options: [Disabled] [Enabled]
32-Bit I/O: [Disabled]
Enables or disables 32-bit IDE data transfer.
Conguration options: [Disabled] [Enabled]
Auto = Autotyping.
None = Disabling drive.
ATAPI Removable = ATAPI
media (e.g., LS120, USB
Floppy, USB Zip).
CD-ROM = CD-ROM drive.
IDE Removable = IDE
removable media (e.g.,
IDE Zip drive).
Other ATAPI = Other
ATAPI media.
User = You simply the
hard disk drive type.