User's Manual

10
1.5 Setup Requirements
To set up your wireless network, you need a computer that meets
the following system requirements:
• EthernetRJ-45(LAN)port(10Base-T/100Base-TX/1000Base-
TX)
• IEEE802.11a/b/g/n/acwirelesscapability
• AninstalledTCP/IPservice
• WebbrowsersuchasInternetExplorer,Firefox,Safari,or
Google Chrome
NOTES:
• Ifyourcomputerdoesnothavebuilt-inwirelesscapabilities,youmay
install an IEEE 802.11
a/b/g/n/ac
WLAN adapter to your computer to
connect to the network.
• Withitsdualbandtechnology,yourADSL/VDSLroutersupports
2.4GHz and 5GHz wireless signals simultaneously. This allows you
to browse the Internet or access e-mail messages using the 2.4GHz
band while streaming high-denition audio/video les such as
movies or music using the 5GHz band.
• IfyouareusingonlyonecomputerwithasinglebandIEEE802.11a/
b/g/n/ac WLAN adapter, you will only be able to use the 2.4GHz
band.
• IfyouareusingonlyonecomputerwithadualbandIEEE802.11a/
b/g/n/ac WLAN adapter, you will be able to use the 2.4GHz or 5GHz
band.
• IfyouareusingtwocomputerswithbothIEEE802.11a/b/g/n/ac
WLAN adapters, you will be able to use both 2.4GHz and 5GHz bands
simultaneously.
• TheEthernetRJ-45cablesthatwillbeusedtoconnectthenetwork
devices should not exceed 100 meters.