User Manual

23
Chapter 4: Conguring via the web GUI DSL-N10S
Configuring the local area network (LAN) settings
The LAN page allows you to congure your local area network (LAN) settings.
To configure the LAN settings:
1. Click Interface Setup > LAN tab. In the Router Local IP eld, key in the IP
Address and IP Subnet Mask.
2. In the DHCP options, select Disabled, Enabled, or Relay.
3. Key in the Starting IP Address, IP Pool Count and Lease Time. Select a
DNS Relay mode from the dropdown list.
4. Click SAVE to apply the settings made or CANCEL to discard changes.
Configuring the LAN settings
The LAN page allows you to congure the interface of your local area network.