User manual

10
DSL-N10S Chapter 1: Knowing your wireless router
Item Description
1
ADSL port
Connect an RJ-11 telephone cable to this port or a splitter
connected from this port.
2
Reset button
Using a pointed blunt object, press this button for more than one
second to reset the system to its factory default settings.
3
WPS button / Wi-Fi switch*
WPS mode: Press this button for more than four seconds to enable
the WPS function.
Wi-Fi switch mode: Press this button to turn on/off the Wi-Fi
function.
* • Wi-Fi switch function is only available in some countries or
regions.
• If you press the button for one to four seconds, no function takes
effect.
4
LAN port
Connect a RJ-45 Ethernet cable to this port to establish LAN
connection.
Rear panel
7
1 2 3 4 5
6