User manual

24
DSL-N10S Chapter 4: Conguring via the web GUI
Conguring the multi-SSID settings
The Multi-SSID page allows you to enable or disable a virtual access point (VAP)
and set up its SSID and authentication type.
To congure the multi-SSID settings:
Click Network > Wireless tab > Multi-SSID.
Tick Enable VAPX to enable a VAP.
In the SSID eld, key in the SSID you want to use.
Select the Authentication type, and select Enable or Disable to enable or
disable SSID broadcast and Relay Blocking.
Click Apply Changes to apply the settings made.
1.
2.
3.
4.
5.
Note: To change the authentication conguration for each SSID, go to the Security tab for
details.