User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
135
On the next screen, check that the ATM interface is added to the
list. For example, an ATM interface on PVC 0/35 in Default Mode
with an EoA Link type is shown below.
To add a WAN connection go to section E2 WAN Connections.
E1.2 ETHERNET WAN Interfaces
Follow these procedures to congure an Ethernet WAN interface.
1. Click Add to create an Ethernet WAN interface.
This table is provided here for ease of reference.
Field Description
Interface/ (Name) WAN interface name.
Connection Mode Default Mode – Single service over one interface.
Vlan Mux Mode – Multiple Vlan services over one interface.
Remove Select interfaces to remove.