User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
40
3.2.3 LAN
Click the LAN tab to display the following.
Congure the LAN interface settings and then click Apply/Save.
Consult the eld descriptions below for more details.
GroupName: Select an Interface Group.
1st LAN INTERFACE
IP Address: Enter the IP address for the LAN port.
Subnet Mask: Enter the subnet mask for the LAN port.
IGMP Snooping:
Standard Mode: In standard mode, multicast trac will
ood to all bridge ports when no client subscribes to a
multicast group – even if IGMP snooping is enabled.
Blocking Mode: In blocking mode, the multicast data trac
will be blocked and not ood to all bridge ports when there
are no client subscriptions to any multicast group.