User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
47
Field Description
Enable RADVD Enable use of router advertisement daemon
RA interval Min(sec): Minimum time to send router advertisement
RA interval Max(sec): Maximum time to send router advertisement
Reachable Time(ms): The time, in milliseconds that a neighbor
is reachable after receiving reachability
conrmation
Default Preference: Preference level associated with the default
router
MTU (bytes): MTU value used in router advertisement
messages to insure that all nodes on a link
use the same MTU value
Enable Prex Length Relay Use prex length receive from WAN interface
Enable Conguration Mode Manually congure prex, prex length,
preferred lifetime and valid lifetime used in
router advertisement
Enable ULA Prex Advertisement Allow RADVD to advertise Unique Local
Address Prex
Randomly Generate Use a Randomly Generated Prex
Statically Congure Prex Specify the prex to be used
Statically Congure The prex to be used
Preferred Life Time (hour) The preferred life time for this prex
Valid Life Time (hour) The valid life time for this prex
Enable MLD Snooping Enable/disable IPv6 multicast forward to LAN
ports
Standard Mode In standard mode, IPv6 multicast trac
will ood to all bridge ports when no client
subscribes to a multicast group even if MLD
snooping is enabled
Blocking Mode In blocking mode, IPv6 multicast data trac
will be blocked and not ood to all bridge
ports when there are no client subscriptions
to any multicast group