User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
67
Click Save/Apply to save and apply the settings.
Consult the table below for eld and header descriptions.
Field Description
Use Interface Select a WAN interface from the drop-down box.
Select an Application User should select the application from the list.
Custom Application User can enter the name of their choice.
Trigger Port Start Enter the starting trigger port number (when you
select custom application). When an application
is selected, the port ranges are automatically
congured.
Trigger Port End Enter the ending trigger port number (when you
select custom application). When an application
is selected, the port ranges are automatically
congured.
Trigger Protocol TCP, TCP/UDP, or UDP.
Open Port Start Enter the starting open port number (when you
select custom application). When an application
is selected, the port ranges are automatically
congured.
Open Port End Enter the ending open port number (when you
select custom application). When an application
is selected, the port ranges are automatically
congured.
Open Protocol TCP, TCP/UDP, or UDP.