User's Manual
Table Of Contents
- 1 Getting to know your ADSL modem router
- 2 Getting started
- 3 Configuring the General settings
- 4 Configuring the System settings
- 5 Logout & Reboot
- Appendix A - Firewall
- Appendix B - Pin Assignments
- Appendix C – Specifications
- Appendix D - SSH Client
- Appendix E - Connection Setup
- Appendix F - WPS OPERATION
- Appendix G
8
NOTE: Use only the adapter that came with your package. Using other
adapters may damage the device.
Wi-Fi LED
O: No Wi-Fi signal.
Solid green: Wireless system is ready.
Flashing green: Transmitting or receiving data via wireless connection.
LAN 1~4 LED
O: No power or no physical connection.
Solid green: Has physical connection to an Ethernet network.
Flashing green: Transmitting or receiving data via wireless connection.
WPS and Wi-Fi on/o button
Press and hold this button more than 5 seconds to activate WPS. Ensure
that the WPS is enabled in Wireless > Security page).
Press and hold this button 2~3 seconds to enable/disable Wi-Fi.
ADSL port
Connect to a splitter or to a telephone outlet via an RJ-11 cable.
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.
Reset button
Press this button for 10 seconds to reset or restore the system to its factory
default settings.
Power button
Press this button to power on or o the system.
Power (DC-IN) port
Insert the bundled AC adapter into this port and connect your router to a
power source.