Quick Start Guide

38
4.1.4 Wireless MAC Filter
Wireless MAC filter provides control over packets transmitted to
a specified MAC (Media Access Control) address on your wireless
network.
To set up the Wireless MAC filter:
1. From the navigation panel, go to Advanced Settings >
Wireless > Wireless MAC Filter tab.
2. Enable the Mac Filter Mode, then in the MAC Filter Mode
dropdown list, select either Accept or Reject.
• SelectAccept to allow devices in the MAC filter list to access
to the wireless network.
• SelectReject to prevent devices in the MAC filter list to
access to the wireless network.
3. On the MAC filter list, click the Add button and key in the
MAC address of the wireless device.
4. Click Apply.