Manual

DSL-X11 User Manual
72
After update software, it is suggested to restore the router to the factory defaults
and configure it again.
3.6.6 Save/Reboot
Click Save/Reboot to show the following interface. Click Save/Reboot to save
and reboot the router.
4 Q&A
(1) Q: Why all the indicators are off?
A: Check the following:
The connection between the power adaptor and the power socket.
The status of the power switch.
(2) Q: Why the Ethernet indicator is off?
A: Check the following
The connection between the ADSL modem and your computer, hub,
or switch.
The running status of your PC, hub, or switch.
(3) Q: Why the Link indicator is off?
A: Check the connection between the “Line” port of router and the wall jack.
(4) Q: Why Internet access fails while the Link indicator is on?
A: Check whether the VPI, VCI, user name, and password are correctly
entered.
(5) Q: Why does the web configuration page of the modem fail to be accessed?
A: Choose Start > Run from the desktop, and ping 192.168.1.1 (IP address
of the modem). If the modem cannot be reached, check the type of the
network cable, the connection between the modem and the PC, and the
TCP/IP configuration of the PC.