Quick Start Guide

SSD Installation Guide for

Dual GeForce RTX™ 4060 Ti SSD graphics card

Q22914 / Revised Edition V2 / November 2023

Please follow the steps below to install your SSD to the Dual GeForce RTX™ 4060 Ti

SSD graphics card:

1. Remove the protective lm on the graphics card.

2. Remove the protective lm carefully from one side of the bundled thermal pad.

3. Align the thermal pad properly within the SSD slot, ensuring that the side with

the protective lm is facing upwards.

4. Remove the remaining protective lm from the thermal pad.

PAGE 1
SSD Installation Guide for Dual GeForce RTX™ 4060 Ti SSD graphics card Please follow the steps below to install your SSD to the Dual GeForce RTX™ 4060 Ti SSD graphics card: 1. Remove the protective film on the graphics card. 1 2. Remove the protective film carefully from one side of the bundled thermal pad. 3. Align the thermal pad properly within the SSD slot, ensuring that the side with the protective film is facing upwards. 4. Remove the remaining protective film from the thermal pad.
PAGE 2
5. Insert your SSD module into the M.2 slot. 6. Rotate the Q-latch quick clip clockwise to secure the SSD module. 5 6 7. Remove the protective film on the thermal pad of the M.2 slot cover 8. Place the M.2 slot cover onto the M.2 slot, ensure the screw hole on the graphics card and the cover are properly aligned. 9. Secure the M.2 slot cover to the graphics card using two (2) screws.