User Guide

38
LED projector E-Manual
FAQs
1. Does my LED projector work with all phones?
The E1Z LED projector will work with android 5.0 or above
devices that support host storage mode.
2. My LED projector does not project anything. How can I x
this?
You can try doing any of the following suggestions:
• Ensurethatyouhaveinstalledthecompanionapps.
• IftheDisplayLinkPresenterappdoesnotpop-upwhen
you connect your android device, try restarting your LED
projector and your android device.
• Iftheproblemstillexists,contactyourlocalASUSservice
center for assistance.
3. Why does my android device keep disconnecting with my
LED projector?
Some android devices will stop the USB connection after the
screenisoorentersthelockscreenmode.Ifthishappens,try
keeping your android device awake or disable sleep mode.
4. Why is audio is not coming out from my LED projector?
Check whether USB audio routing is enabled on your android
device. By default, android devices will automatically route
audio to the USB port when an USB audio peripheral is
connected.
To manually congure the USB audio routing settings, go to
Settings > About > Software information > Build number (tap a
few times) > Settings > Developer options > Disable USB audio
routing.