User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Trusted Computing
- 4.4.2 PCH Storage Configuration
- 4.4.3 Onboard Devices Configuration
- 4.4.4 ACPI Settings
- 4.4.5 APM Configuration
- 4.4.6 SMART Settings
- 4.4.7 NCT6116D Super IO Configuration
- 4.4.8 NCT6116D HW Monitor
- 4.4.9 Serial Port Console Redirection
- 4.4.10 CPU Configuration
- 4.4.11 AMI Graphic Output Protocol Policy
- 4.4.12 PCI Subsystem Settings
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 SDIO Configuration
- 4.4.16 Platform Trust Technology
- 4.4.17 Security Configuration
- 4.4.18 LFP Configuration
- 4.4.19 Thermal
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
16
Single Board Computer
Layout contents Page
1. M.2 Wi-Fi slot 24
2. Nano SIM Card slot 24
3. Mini PCIe slot 23
4. DIMM slot 17
5. Low Pin Count connector 27
6. Battery connector 27
7. LVDS connector (on selected models) 26
8. Back Light Inverter Power connector 26
9. EDP Signal connector (on selected models) 28
10. LVDS Panel Power Selection jumper (on selected models) 19
11. Back Light Power Selection jumper 19
12. Back Light Power Enable jumper 20
13. GPIO connector 29
14. Chassis Intrusion connector 33
15. System Management Bus connector 29
16. I2C connector 30
17. Clear RTC RAM jumper 18/
18. Serial Port connector 31
19. Micro SD card slot 23
20. M.2 slot 25
21. USB 2.0 connector 32
22. DC-in 4-Pin Power connector 37
23. SATA 6Gb/s & SATA Power connector 22
24. HW WDT Enable jumper 20
25. AT/ATX Mode Conguration jumper 21
26. Power button connector 25
27. SPI TPM connector 30
28. System Panel connector 35
29. Fan connector 34
30. Line Out / Mic connector 36