User's Manual

68 Single Board Computer
NOTE: The following items appear only when Serial Port is set to
[Enabled].
Mode Select
Conguration options: [RS232] [RS485] [RS422]
Change Settings
Allows you to choose the setting for Super IO device.
Conguration options: [Auto] [IO=3F8h; IRQ=4;] [IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12;] [IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=3E8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;]
Serial Port 3-6 Conguration
Allows you to set the parameters of Serial Port 3-6.
Serial Port
Allows you to enable or disable Serial Port.
Conguration options: [Disabled] [Enabled]
NOTE: The f
ollowing items appear only when Serial Port is set to
[Enabled].
Change Settings
Allows you to choose the setting for Super IO device.
Conguration options: [Auto] [IO=3F8h; IRQ=4;] [IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12;] [IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=3E8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;]