User's Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Trusted Computing
- 4.4.2 PCH Storage Configuration
- 4.4.3 Onboard Devices Configuration
- 4.4.4 ACPI Settings
- 4.4.5 APM Configuration
- 4.4.6 SMART Settings
- 4.4.7 NCT6116D Super IO Configuration
- 4.4.8 NCT6116D HW Monitor
- 4.4.9 Serial Port Console Redirection
- 4.4.10 CPU Configuration
- 4.4.11 AMI Graphic Output Protocol Policy
- 4.4.12 PCI Subsystem Settings
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 SDIO Configuration
- 4.4.16 Platform Trust Technology
- 4.4.17 Security Configuration
- 4.4.18 LFP Configuration
- 4.4.19 Thermal
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
Single Board Computer
95
To update the BIOS using EzFlash Utility:
1. Insert the USB ash disk that contains the latest BIOS le to the USB
port.
2. Enter the BIOS setup program. Go to the Advanced menu to select
Start ASUS EzFlash and press <Enter> to enable it.
WARNING! Ensure to back up your Bitlocker recovery key and suspend
Bitlocker encryption in the operating system before updating your
BIOS.
ASUSTek. EzFlash Utility
FS0
FS1
System Volume Information
<DIR>
E395S-IM-AA-ASUS-0401.CAP 16781312 Bytes
Current Platform
Platform : E395S-IM-AA Platform : E395S-IM-AA
Version : 0204
Build Date :05/15/2019
New Platform
Version : 0401
Build Date :06/19/2019
3. Press <Tab> to switch to the Drive eld.
4. Press the Up/Down arrow keys to nd the USB ash disk that contains
the latest BIOS then press <Enter>.
5. Press <Tab> to switch to the Folder Info eld.
6. Press the Up/Down arrow keys to nd the BIOS le then press <Enter>.
7. Reboot the system when the update process is done.