User's Manual

ASUS MAXIMUS V EXTREME
6-9
Chapter 6
4. Align and rmly insert the 3-way SLI
bridge connector to the goldngers on
each graphics card. Ensure that the
connector is rmly in place.
5. Connect three independent auxiliary
power sources from the power supply
to the three graphics cards.
6. Connect a VGA or a DVI cable to the
graphics card.
3-WAY SLI bridge
6.2.4 Installing four SLI-ready graphics cards
Refer to the documentation that came with your graphics card package to install the device
drivers.
1. Prepare four SLI-ready graphic a cards.
2. Insert the three graphics cards into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 1 in this user manual
for locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
3. Ensure that the cards are properly
seated on the slots.
4. Align and rmly insert the 4-WAY SLI
bridge connector to the goldngers on
each graphics card. Ensure that the
connector is rmly in place.
5. Connect four independent auxiliary
power sources from the power supply
to the four graphic cards.
4-WAY SLI bridge