User's Manual
ASUS PIKE 2208 2-29
◊ No: Leave background initialization enabled. This means that a new
conguration can be initialized in the background while you use
WebBIOS to do other conguration tasks. This is the default.
◊ Yes: Select Yes if you do not want to allow background initializations
for congurations on this controller.
• Select Size: Specify the size of the virtual drive in terabytes, gigabytes,
megabytes, or kilobytes. Normally, this would be the full size for RAID 60
shown in the Conguration panel on the right. You may specify a smaller
size if you want to create other virtual drives on the same drive group.
15. Click Accept to accept the changes to the virtual drive denition, or click
Reclaim to undo the changes.
16. Click Yes to conrm the write policy mode you have chosen.
17. Click Next after you nish dening virtual drives. The conguration preview
screen appears.
18. Check the information in the conguration preview screen.
19. If the virtual drive conguration is acceptable, click Accept to save the
conguration. Otherwise, click Cancel to end the operation and return to the
WebBIOS main menu, or click Back to return to the previous screens and
change the conguration.
20. If you accept the conguration, click Yes at the prompt to save the
conguration.
21. Click Yes at the prompt to start initialization.
22. After the virtual drive is successfully
created, the Manage SSD Caching
screen appears. Click Cancel to
close the sceen.