User Manual
Table Of Contents
- Notices
- Safety information
- Chapter 1
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 AMT Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Super IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA And RST Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 EZ-Flash
- 3.3.16 APM Configuration
- 3.3.17 Watchdog Timer
- 3.3.19 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
ASUS EBE-4U
3-3
BIOS menu screen
The menu bar on top of the screen has the following main items:
Main
For changing the basic system conguration.
Advanced
For changing the advanced system settings.
Hardware
Monitor
For displaying the system temperatures, fan and power status, and
changing smart fan settings.
Security
For conguring the system security settings.
Boot
For changing the system boot conguration.
Exit
For selecting the save options and default options.
To select an item on the menu bar, press the right or left arrow key on the keyboard until the
desired item is highlighted.
3.2 Main menu
The Main menu provides you with an overview of the basic system information, and allows
you to set the system date and the system time.
3.2.1 System Date [Day MM/DD/YYYY]
Allows you to set the system date.
3.2.2 System Time [HH:MM:SS]
Allows you to set the system time.
3.3 Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect eld values
can cause the system to malfunction.
3.3.1 PCH-FW Configuration
This item allows you to congure Management Engine Technology parameters.
TPM Device Selection
Allows you to select TPM device.
[PTT] Enables PTT in SkuMgr.
[dTPM] Disables PTT in SkuMgr.
When PTT is disabled, all data saved on it will be lost.