User Manual
Table Of Contents
- Notices
- Safety information
- Chapter 1
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 AMT Configuration
- 3.3.7 CSM Configuration
- 3.3.8 Super IO Configuration
- 3.3.9 Serial Console Redirection
- 3.3.10 SATA And RST Configuration
- 3.3.11 Network Stack Configuration
- 3.3.12 USB Configuration
- 3.3.13 NVMe Configuration
- 3.3.14 Onboard Devices Configuration
- 3.3.15 EZ-Flash
- 3.3.16 APM Configuration
- 3.3.17 Watchdog Timer
- 3.3.19 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
3-8 Chapter 3: BIOS setup
ASPM
This item allows you to control ASPM support for the PEG 2, and this has no effect if
PGE is not the currently active device. Conguration options: [Disabled] [Auto] [ASPM
L0s] [ASPM L1] [ASPM L0sL1]
PCIEX4_1 (X2)
Allows you to congure the PCI Express root port settings.
PCIEX4_1(X2)
Allows you to enable or disable the PCI Express Root Port. Conguration options:
[Disabled] [Enabled]
ASPM 16
This item allows you to set the ASPM level. Conguration options: [Disabled] [L0s] [L1]
[L0sL1] [Auto]
L1 Substates
This item allows you to congure the PCI Express L1 Substates settings. Conguration
options: [Disabled] [L1.1] [L1.1 & L1.2]
PCIe Speed
This item allows you to set the PCIe speed. Conguration options: [Auto] [Gen1]
[Gen2] [Gen3]
Detect Timeout
This item allows you to set the detection time (milliseconds) for enabled ports before it
exit the detection status.
Detect Non-Compliance Device
This item allows you to enable or disable detection of non-compliance PCI Express
devices. If enabled, more time will be required during POST. Conguration options:
[Disabled] [Enabled]
PCIEX4_2 / PCIEX4_3
Allows you to congure the PCI Express root port settings.
PCIEX4_2 / PCIEX4_3
Allows you to enable or disable the PCI Express Root Port. Conguration options:
[Disabled] [Enabled]
ASPM 1
This item allows you to set the ASPM level. Conguration options: [Disabled] [L0s] [L1]
[L0sL1] [Auto]
L1 Substates
This item allows you to congure the PCI Express L1 Substates settings. Conguration
options: [Disabled] [L1.1] [L1.1 & L1.2]
PCIe Speed
This item allows you to set the PCIe speed. Conguration options: [Auto] [Gen1]
[Gen2] [Gen3]