User Manual
Table Of Contents
- Notices
- Safety information
- Chapter 1
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EzFlash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
H610A-IM-A
2-18
4. TPM header (14-1 pin TPM)
This header supports a Trusted Platform Module (TPM) system with a Serial Peripheral
Interface (SPI), allowing you to securely store keys, digital certicates, passwords and
data. A TPM system also enhances network security, protects digital identities, and
ensures platform integrity.
TPM
PIN 1
+3VSB
PLTRST#
+3VSB SPI
SPI CS#
SPI MISO
SPI HOLD#
SPI TPM IRQ#
SPI TPM CS#
SPI FLASH WP#
GND
SPI CLK
SPI MOSI
Connector type
HEADER 2x7p, K14, 2.0mm pitch
CAUTION! Never connect a 1394 cable to the USB connector. Doing so will damage the
motherboard.
NOTE: The USB cable is purchased separately.
3. USB 2.0 header (10-pin USB914)
This header is for USB 2.0 ports. Connect a USB cable to the header. The USB header
complies with USB 2.0 specication that supports up to 480 Mbps connection speed.
USB914
NC
GND
USB_P9+
USB_P9-
USB+5V
GND
USB_P14+
USB_P14-
USB+5V
PIN 1
Connector type
HEADER 2x5p, K9, 2.54mm pitch