User Manual
Table Of Contents
- Notices
- Safety information
- Chapter 1
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Configuration
- 3.3.9 SATA Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 APM Configuration
- 3.3.13 EzFlash
- 3.3.14 Watchdog Timer
- 3.3.15 Network Stack Configuration
- 3.3.16 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- Appendix
- BIOS setup
ASUS EBE-4U 2-23
11. General purpose input/output header (10-pin GPIO_CON)
This header is for a general purpose input/output module which allows you to
customize the digital signal input/output.
+5VSB
GPIO7
GPIO5
GPIO3
GPIO1
GND
GPIO8
GPIO6
GPIO4
GPIO2
GPIO_CON
PIN 1
Connector type
WAFER HD 2x5p, 2.0mm pitch, S/T
12. LPC Debug header
This header allows connection to a LPC Debug card.
LPC_DEBUG
PIN 1
+3V
+3V
CK_24M_DEBUG_LPC
GND
SLAD0_SIO
SLAD1_SIO
SLAD2_SIO
SLAD3_SIO
S_LFRAME#
Connector type
HEADER 2x5p, K10, 2.0mm pitch
IMPORTANT!
• Scan the QR code to view the meaning of each debugging code.
• Debugging codes are only available for ASUS LPC Debug cards.
• Contact your region sales representative for LPC Debug cards ordering.