User Manual

ASUS EBE-4U
3-5
Enhanced C-states
Allows to enable or disable the enhanced C1 state.
Conguration options: [Disabled] [Enabled]
Package C State limit
Allows you to disable or enable the whole C-State package support. Conguration
options: [C0/C1] [C2] [C3] [C6] [C7] [C7s] [C8] [Cpu Default] [Auto]
3.3.4 Graphics Configuration
The items in this menu allow you to select a primary display from IGFX, PEG and
PCI graphical devices.
Primary Display
Allows you to select which of the IGFX/PEG/PCI Graphics device should be the
Primary Display. Conguration options: [Auto] [IGFX] [PEG] [PCI]
Internal Graphics
[Auto] Keep IGFX enabled base on the setup options.
[Disabled] Disables internal graphics.
[Enabled] Enables internal graphics.
RC6 (Render Standby)
Allows you to enable or disable render standby support.
Conguration options: [Disabled] [Enabled]
3.3.5 PCI Express Configuration
Allows you to select a PEG or PCI graphical device.
PCIEX16_1 Slot
Enable Root Port
Allows you to enable or disable the root port.
Conguration options: [Disabled] [Enabled] [Auto]
Max Link Speed
Allows you to congure PEG 0:1:0.
Conguration options: [Auto] [Gen1] [Gen2] [Gen 3]
Max Link Width
Allows you to force the PEG link to x1, x2, x4 or x8.
Conguration options: [Auto] [Force X1] [Force X2] [Force X4] [Force X8]
ASPM
Allows you to control the ASPM (Active State Power Management) for PEG 0. It does
not work if PEG is not the current active device. Conguration options: [Disabled]
[Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]