User Manual

3-12 Chapter 3: BIOS setup
Power On By RTC
[Enabled] When set to [Enabled], the items RTC Alarm Date(Days) and Hour/
Minute/Second are use-confgurable with set values.
[Disabled] Disables RTC to generate a wake event.
3.3.13 EzFlash
Enter Ez-Flash mode
This item allows you to run EzFlash utility. When you press <Enter>, a conrmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
conrm your choice.
3.3.14 Watchdog Timer
Watchdog Support
This item allows you to enable or disable Watchdog timer.
Conguration options: [Enabled] [Disabled]
Watchdog Timer
Use the <+> and <-> keys to adjust the value or input the desired value directly. The value
ranges from 1 to 255.
3.3.15 Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI network stack.
Conguration options: [Disabled] [Enabled]
The following items appear only when you set Network Stack to [Enabled].
Ipv4 PXE Support
This item allows user to disable or enable the Ipv4 PXE Boot support.
Conguration options: [Disabled] [Enabled]
Ipv6 PXE Support
This item allows user to disable or enable the Ipv6 PXE Boot support.
Conguration options: [Disabled] [Enabled]
3.3.16 Miscellaneous
DMI/OPI Configuration
DMI Link ASPM Control
This item allows you to control the Active State Power Management on SA side of
the DMI Link. Conguration options: [Disabled][L1]