User Manual

3-10 Chapter 3: BIOS setup
Intel LAN2 Controller
[Enabled] Enables the Intel LAN2 controller.
[Disabled] Disables the controller.
Intel LAN2 PXE OPROM
This item allows you to enable or disable the PXE Option ROM of the Intel LAN2
controller. Conguration options: [Disabled] [Enabled]
3.3.12 APM Configuration
ErP Ready
Allows you to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Conguration options: [Disabled] [Enabled]
Restore AC Power Loss
[S5 State] The system goes into off state after an AC power loss.
[S0 State] The system goes into on state after an AC power loss.
Power On By PCI-E
This item allows you to enable or disable the Wake-on-LAN function of the onboard
LAN controller or other installed PCIe LAN cards. Conguration options: [Disabled]
[Enabled]
Power On By PCI
This item allows you to enable or disable the Wake-on-LAN function of the onboard
LAN controller or other installed PCI LAN cards. Conguration options: [Disabled]
[Enabled]
Power On By Ring
[Enabled] Enables the Ring devices to generate a wake event.
[Disabled] Disables the Ring devices to generate a wake event.
Power On By RTC
[Enabled] When set to [Enabled], the items RTC Alarm Date(Days) and Hour/
Minute/Second are use-confgurable with set values.
[Disabled] Disables RTC to generate a wake event.
3.3.13 EzFlash
Enter Ez-Flash mode
This item allows you to run EzFlash utility. When you press <Enter>, a conrmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
conrm your choice.