User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 LVDS Configuration
- 4.4.2 PCH-FW Configuration
- 4.4.3 Trusted Computing
- 4.4.4 CPU Configuration
- 4.4.5 Graphics Configuration
- 4.4.6 Super IO Configuration
- 4.4.7 Serial Console Redirection
- 4.4.8 SATA Configuration
- 4.4.9 Network Stack Configuration
- 4.4.10 USB Configuration
- 4.4.11 NVMe Configuration
- 4.4.12 SDIO Configuration
- 4.4.13 Onboard Devices Configuration
- 4.4.14 APM Configuration
- 4.4.15 EZ-Flash
- 4.4.16 Watchdog Timer
- 4.5 Hardware Monitor menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 Updating your BIOS
- Appendix
Single Board Computer
43
BLON disable to to LVDS_ON disable (T4)
Use the <+> or <-> to adjust the value. The values range from 0 to 1023.
LVDS_ON disable to DIGON disbale (T5)
Use the <+> or <-> to adjust the value. The values range from 0 to 50.
Completion of power down to power up (T7)
Use the <+> or <-> to adjust the value. The values range from 0 to 1023.
VARY_BL enable to BL_EN enable (T9)
Use the <+> or <-> to adjust the value. The values range from 0 to 1023.
BL_EN enable to enable VARY_BL disable (T10)
Use the <+> or <-> to adjust the value. The values range from 0 to 1023.