Eee PC User’s Manual Eee PC 4G (701) Eee PC 4G Surf Eee PC 8G October 2007
Table of Contents Chaper 1: Introducing the Eee PC About This User’s Manual............................................................................. 1-2 Notes for This Manual.................................................................................... 1-3 Safety Precautions.......................................................................................... 1-4 Transportation Precautions....................................................................... 1-5 Charging Your Batteries.....
Table of Contents Accessing E-mail..........................................................................................4-16 Chatting with friends.................................................................................4-17 Checking the World Clock........................................................................4-19 Work ...............................................................................................................4-20 Office applications..................................
Table of Contents Task Manager................................................................................................4-46 Favorites...........................................................................................................4-47 Chaper 5: Installing & Optimizing Windows® XP Preparing to install Windows® XP.............................................................. 5-2 Installing Windows® XP..................................................................................
About This User’s Manual Notes for This Manual Safety Precautions Preparing Your Eee PC 1 Introducing the Eee PC
About This User’s Manual You are reading the Eee PC User’s Manual. This User’s Manual provides information regarding the various components in the Eee PC and how to use them. The following are major sections of this User’s Manual: 1. Introducing the Eee PC Introduces the Eee PC and this User’s Manual. 2. Knowing the Parts Provides information on the Eee PC’s components. 3. Getting Started Provides information on getting started with the Eee PC. 4.
Notes for This Manual A few notes and warnings are used throughout this guide, allowing you to complete certain tasks safely and effectively. These notes have different degrees of importance as follows: WARNING! Important information that must be followed for safe operation. IMPORTANT! Vital information that must be followed to prevent damage to data, components, or persons. TIP: Tips for completing tasks. NOTE: Information for special situations.
Safety Precautions The following safety precautions will increase the life of the Eee PC. Follow all precautions and instructions. Except as described in this manual, refer all servicing to qualified personnel. Do not use damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners, benzene, or other chemicals on or near the surface. Disconnect the AC power and remove the battery pack(s) before cleaning.
Transportation Precautions To prepare the Eee PC for transport, you should turn it OFF and disconnect all external peripherals to prevent damage to the connectors. The solid-state disk drive’s head retracts when the power is turned OFF to prevent scratching of the solid-state disk drive surface during transport. Therefore, you should not transport the Eee PC while the power is still ON.
Preparing your Eee PC These are only quick instructions for using your Eee PC. Read the following chapters for detailed information. 1 1. Install the battery pack 2 1 2 2. Connect the AC power adapter 1 3 The wall outlet differs in type by country. Your Eee PC ships with an adapter compliant with your national standard. The illustration above is for reference only and may not exactly show your specific configuration. Refer to page 3-2 for more details.
3. Open the display panel 4.
1- Chapter 1: Introducing the Eee PC
Top Side Bottom Side Right Side Left Side Rear Side 2 Knowing the Parts
Top Side Refer to the diagram below to identify the components on this side of the Eee PC. 1 2 3 4 5 6 The keyboard will differ for each territory.
1 Built-in Camera (optional) The built-in camera allows picture taking or video recording. 2 Display Panel The display panel functions the same as a desktop monitor. The Eee PC uses an active matrix TFT LCD, which provides excellent viewing like that of desktop monitors. Unlike desktop monitors, the LCD panel does not produce any radiation or flickering, so it is easier on the eyes. Use a soft cloth without chemical liquids (use plain water if necessary) to clean the display panel.
6 Status Indicators (front) Power Indicator The power indicator lights when the Eee PC is turned ON and blinks slowly when the Eee PC is in the Save-toRAM (Suspend) mode. This indicator is OFF when the Eee PC is turned OFF. Battery Charge Indicator The battery charge indicator (LED) shows the status of the battery’s power as follows: ON: The Eee PC’s battery is charging when AC power is connected. OFF: The Eee PC’s battery is charged or completely drained.
Bottom Side Refer to the diagram below to identify the components on this side of the Eee PC. The bottom side may vary in appearance depending on model. 1 3 2 4 5 6 The bottom of the Eee PC can get very hot. Be careful when handling the Eee PC while it is in operation or recently been in operation. High temperatures are normal during charging or operation. DO NOT use on soft surfaces such as beds or sofas ,which may block the vents.
1 Battery Lock - Spring The spring battery lock keeps the battery pack secure. When the battery pack is inserted, it will automatically lock. When removing the battery pack, this spring lock must be retained in the unlocked position. 2 Battery Pack The battery pack is automatically charged when connected to an AC power source and maintains power to the Eee PC when AC power is not connected. This allows use when moving temporarily between locations.
Right Side Refer to the diagram below to identify the components on this side of the Eee PC. 1 1 2 2 3 4 Memory Card Slot The built-in memory card reader can read MMC/SD cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs. 2 2.0 USB Port (2.0/1.1) The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, and storage devices, connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.
Left Side Refer to the diagram below to identify the components on this side of the Eee PC. 1 1 2 2 3 4 5 LAN Port The eight-pin RJ-45 LAN port (10/100M bit) supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters. Modem Port (optional) The two-pin RJ-11 modem port supports a standard telephone cable. The internal modem supports up to 56K V.90 transfers.
5 Headphone Output Jack The 1/8” stereo headphone jack (3.55mm) connects the Eee PC’s audio out signal to amplified speakers or headphones. Using this jack automatically disables the built-in speakers. Rear Side Refer to the diagram below to identify the components on this side of the Eee PC. 1 1 2 2 Battery Pack The battery pack is automatically charged when connected to an AC power source and maintains power to the Eee PC when AC power is not connected.
2-10 Chapter 2: Knowing the Parts
Power System Touchpad Usage Keyboard Usage First Run Wizard Operating Mode Shutdown 3 Getting Started
Power System Using AC Power The Eee PC power comprises two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall outlet to the DC power required by the Eee PC. Your Eee PC comes with a universal AC-DC adapter for connection to any 100V-120V as well as 220V-240V outlets without setting switches or using power converters. Different countries may require an adapter to connect the provided US-standard AC power cord to a different standard.
2. Align the plug and snap it in place. Removing the prong-plug adapter Follow the instruction below to remove the prong-plug adapter if needed. • Press the retaining tab and snap the plug out. This Eee PC may come with either a two or three-prong plug adapter depending on territory to fit your wall outlet. Damage may occur if you use a different adapter to power the Eee PC or use the Eee PC’s adapter to power other electrical devices.
Using Battery Power The Eee PC is designed to work with a removable battery pack. The battery pack consists of a set of battery cells housed together. A fully charged pack will provide several hours of battery life. Additional battery packs are optional and can be purchased separately through an Eee PC retailer. Remember to fully charge the battery before first use and whenever it is depleted to prolong battery life.
Emergency Shutdown & Reset In case your operating system cannot properly turn OFF or restart, there are additional ways to shutdown and reset your Eee PC: Shutdown: Hold the power button down. Reset: Press the reset button until the system shuts . Use a pin or a straightened paper clip to press the power switch. DO NOT use emergency shutdown/reset while data is being written or read; doing so can result in loss or destruction of your data. The reset button is not provided on Eee PC 4G Surf model.
Touchpad Usage Clicking/Tapping - With the cursor over an item, press the left button or use your fingertip to touch the touchpad lightly, keeping your finger on the touchpad until the item is selected. The selected item will change color. The following 2 illustrations produce the same results. Double-clicking/Double-tapping - This is a common skill for launching a program directly from the corresponding icon you select.
Dragging - Dragging means to pick up an item and place it anywhere on the screen you wish. You can move the cursor over the item you select, and while keeping the left button depressed, moving the cursor to the desired location, then release the button. Or, you can simply double-tap on the item and hold while dragging the item with your fingertip. The following illustrations produce the same results. Scrolling - Slide you finger up or down on the right side of the touchpad to scroll a window up or down.
Keyboard Usage Special Function Keys The following defines the colored hot keys on the Eee PC’s keyboard. The colored commands can only be accessed by first pressing and holding the function key while pressing a key with a colored command. Some function icons appear on the OS taskbar after activation. The Hot Key locations on the function keys may vary depending on model but the functions should remain the same. Follow the icons whenever your hot key locations do not match the manual.
Task Manager Icon (F6): Initiates the Task Manager to view the application process or terminates applications. Crossed Speaker Icon (F7): Mutes the speaker. Speaker Down Icon (F8): Decreases speaker volume. Speaker Up Icon (F9): Increases the speaker volume. Num Lk (F11): Toggles the numeric keypad (number lock) ON and OFF. Allows use of a larger portion of the keyboard for number entering. Scr Lk (F12): Toggles the “Scroll Lock” ON and OFF.
House icon: Returns to the main menu. Menu with cursor icon : Activates the properties menu and is equivalent to right-clicking the touchpad/mouse on an object. Adjust the window If the application window is not in the center of the screen and you want to adjust the position of the window, follow the instructions below to adjust the window position. 1. 2. 3-10 Hold and the touchpad left button to turn the cursor into a cross arrow.
First Run Wizard For the first time you start your Eee PC, the First Run Wizard will auto-launch and lead you through setting up your preferences and some basic information. Follow the wizard instructions to finish the initiation. 1. Toggle I agree with this license and click Next to continue. 2. Select your keyboard type and click Next to continue. 3. Enter your User Name. Click Next to continue.
4. Enter your Password and enter again to confirm the password. Click Next to continue. Click the box before Log me in automatically when system starts up if you want to log in without entering your password. Doing so will allow people to access your computer without permission. Keep your password in mind! You have to pass the password check every time you start up your Eee PC if you select not to login automatically. 3-12 5.
Operating Mode The system is designed with an operating mode that is functionoriented and clearly divides functions into six categories, Internet, Work, Learn, Play, Settings, Favorites. The lucid desktop categorization is convenient for first-time users to operate this Eee PC and enables sophisticated users to more easily locate and initiate applications.
Shutdown Do the following instructions to turn down your Eee PC. on the taskbar. 1. Click the red power switch 2. 3. Or, click Instant Shutdown from the Settings tab and select Shutdown. Or, press the power switch of the Eee PC directly. Select Shut Down from the dialog box. Select OK to proceed.
Internet Work Learn Play Settings Favorites 4 Using the Eee PC
Internet Configuring a wireless network connection 1. Press + ( + ) to activate the wireless LAN function. 2. Click Wireless Networks from Internet tab. 3. Select the wireless access point you want to connect to from the list and click Connect to build the connection. Ensure that the box before Enable wireless is checked. 4. 4- When connecting, you may have to enter a password.
5. After a connection has been established, the connection is shown on the list. 6. You can see the wireless signal strength bars on the OS taskbar. In Windows XP environment, the wireless connection icon disappears when you disable the wireless LAN by pressing + ( + ). Activate the wireless LAN function before configuring a wireless network connection.
Configuring a network connection If you want to obtain network access, connect the network cable, with RJ-45 connectors on each end, to the network port on the Eee PC and the other end to a hub or switch. The illustration below is the example of your Eee PC connected to a network hub or switch for use with the built-in Ethernet controller. Connect to network before enjoying all the network services and functions in Eee PC.
2. Click Create to create a network connection. 3. Select the type of connection you are using and click Next. 4. Toggle the first option Dynamic IP address (DHCP) and click Next. 5. Enter a name for this connection and click Next.
6. Click Finish to apply the settings or click Back to make changes. Click the box before Connect automatically at system startup or before the box Start this connection when finished based on your needs. Using a static IP: 1. Repeat the step 1~3 of Using a dynamic IP to start the static IP network configuraton. 2. Toggle the second option Static IP address and click Next. 3. Enter the IP address, Subnet mask and Gateway from your service provider.
4. There is no need to enter the DNS and WINS address unless you want to override the server provided DNS server address. If so, enter the preferred DNS Server address, alternative address and WINS address of your service provider. 5. Enter the DNS domain name for your network or click Next to proceed directly. 6. Enter a name for this connection and click Next. 7. Click Finish to apply the settings or click Back to make changes.
Point-to-Point Protocol over Ethernet (PPPoE) 1. 2. 4- Repeat the step 1~2 of Using a static IP to start the PPPoE network configuraton. Select the type of connection you are using and click Next. 3. Select the hardware that you want to use to make your connection and click Next. 4. Enter your user name and password and click Next. 5. Enter a name for this connection and click Next.
6. Click Finish to apply the settings or click Back to make changes. Select Connect automatically at system startup or Start this connection when finished based on your individual configuration. Wireless Point-to-Point Protocol over Ethernet 1. 2. 3. Repeat the step 1~2 of Using a static IP to start the wireless PPPoE network configuraton. Select the type of connection you are using and click Next. Select the hardware that you want to use to make your connection and click Next.
4-10 5. Enter the wireless channel information and click Next. 6. Set the encryption information for the wireless connection and click Next. 7. Enter your user name and password and click Next. 8. Enter a name for this connection and click Next. 9. Click Finish to apply the settings or click Back to make changes.
Dial-up (Optional) The telephone wire used to connect the Eee PC’s internal modem should have either two or four wires (only two wires (telephone line #1) is used by the modem) and should have an RJ-11 connector on both ends. Connect one end to the modem port and the other to an analog telephone wall socket (as found in residential buildings). Telephone connector is the smaller of the two.
1. 2. 4-12 Repeat the step 1~2 of Using a static IP to start the Dial-up network configuraton. Select the type of connection you are using and click Next. 3. Select the hardware that you want to use to make your connection and click Next. 4. Enter the phone number required to connect to your internet service provider and click Next. 5. Enter your user name and password and click Next.
6. Enter a name for this connection and click Next. 7. Click Finish to apply the settings or click Back to make changes.
Browsing web pages After you finish the network setup, click Web from the Internet tab to launch the Mozilla Firefox web browser and start enjoying net surfing. Launches the Mozilla Firefox web browser Visit our Eee PC homepage (http://eeepc.asus.com) to obtain the latest information and register at http://vip.asus.com for full service of your Eee PC. If you think the browser font size too small to read, go to View > Text Size to adjust.
Enjoying free resources Eee PC thoughtfully builds serveral resources shortcuts, including iGoogle, Google Docs, and Wikipedia. Click an item and enjoy a charge-free service through Mozilla Firefox web browser. Connects to iGoogle (www. igoogle.com) Connects to Wikipedia Connects to Google Docs (docs.google.
Accessing E-mail Select Web Mail to display the webmail accesses, including Gmail, Hotmail, Yahoo Mail, and AOL Mail. Opens the built-in webmail list Select your e-mail service provider. If you do not use any of the displayed e-mail provider, click the Back to Internet tab button and select Web to log onto your own e-mail account.
Chatting with friends Messenger 1. Select Messenger from the Internet tab and the Welcome to Pidgin screen displays. Press the Add button to configure your instant messaging account. Press to select an instant messaging service 2. Select an instant messaging service you are using from the drop-down list and fill out your password along with other necessary information to login your account. Select an instant messaging service If you do not have an IM account, apply one from the service providers.
Skype™ 1. Select Skype from the Internet tab and start chatting through Skype. Initiate Skype application 2. Select your preferred language and press Accept button to agree to the end user license agreement. Click to select language Press to continue 3. 4-18 Enter your Skype name and password to login.
Checking the World Clock 1. Select World Clock to start the KDE world clock software. Starts the KDE World Clock 2. Major cities and territories are marked on the map in black. When you move the cursor over the map, the screen automatically displays the city name and its local time wherever you leave the cursor.
Work Office applications Documents/Spreadsheets/Presentations/PDF Reader The Work tab includes several office software items like Documents, Spreadsheets, Presentations, and PDF Reader. Some applications may require setup before use. Follow the steps as provided by the respective wizard to finish the initialization and get your jobs done more efficiently.
Accessing files The following example describes how to locate and open your document from the connected external storage device: 1. 2. Double-click Documents to start OpenOffice.org Writer. Click File and select Open, or press + . 3. At the prompt, click My Home on the left and select Removable Disk (may be labled as your USB storage brand name) to enter the sub-directory (may be labeled as FLASH or partition1, etc.).
4. Double-click the folder to display the files within. Select the desired file, and click OK to open. 5. After the file is opened, you can start editing your document and doing your job. For other office applications, follow the general steps above to access files.
Mail The Mozilla Thunderbird e-mail client allows to import preferences, account settings, address books, and other data from an existing account in your original personal computer or notebook. Follow the Account Wizard for new account setup. Starts the Mozilla Thunderbird e-mail client Local folders pane Preview pane Mail list pane Contact your service provider If you do not know the incoming and outgoing server address of your e-mail account.
Management software Your Eee PC includes two management-related applications. I. File Manager provides an overview of all your files and enables easy management of data. Starts the File Manager Eee PC supports file compression in a zip and tgz file format only, and file extraction from zip, gz, tar, and rar formats. To locate and open your file: 1. 2. 4-24 Connect your USB flash memory disk or USB portable hard disk drive containing desired data to your Eee PC.
3. (A) Click Removable Disk (may be labeled as your disk drive brand name) in the left directory tree pane, and (B) double-click the folder shown in the right pane. A 4. B All the files and folders in your USB external storage device are shown in the right pane. Locate the desired file and double-click it to open. • • ASUS Eee PC Use the directory tree in the left pane to locate files more quickly if numerous folders are listed.
II. PIM (Personal Information Manager) helps manage personal information like appointments, to-do items and contacts.
Accessories & Dictionary The bundled accessories, Calculator and Screen Capture, are convenient and easy to use; the built-in Dictionary prevents you from lost in translation. Calculator and Screen Capture To start these tools: Click to open the Accessories Click to return to the Work tab Runs the Screen capture application Opens the calculator Press + ( + ) to initiate the screen capture tool directly and capture the full screen.
Learn Science After entering Science, you will find the options of the interactive Periodic Table and Planetarium. Move the cursor over and start your science learning. Select Science to enter 1. 2. Periodic Table provides miscellaneous information, including picture, energy information, chemical data, and atom model for all elements. Click any wanted element and know more. Planetarium projects and simulates the motions of the heavenly bodies, and marks constellations with latitude and longitude.
Language Several English learning games are included in Language, providing entertaining exercises for English typing and spelling. Click to return to the Learn tab Starts the Hangman game Starts the vocabulary spelling game Starts the typing practice tool Math Study fractions with your personal tutor in Eee PC. Fraction Tutorial clearly demonstrates and teaches you fractions. TuxMath teaches math more fun, teaching math by incorporating a shooting game.
Paint Paint includes an image editing program (Paint) and a drawing program (Tux Paint). Click to return to the Learn tab Starts Tux Paint Starts mtPaint Web Learn This is a shortcut to Skoool. Double-click the item to link to Skoool interactive learning site (www.skoool.ie).
Play Media Player Enjoy your music and movies with the Media Player. Starts the Media Player Loads subtitles Play Pause Stop 10 mins rewind 1 min rewind 10 secs rewind Jump to 10 secs forward 1 min forward 10 mins forward Full Screen Mute Volume adjustment Move the cursor over the items on the user interface, and the pop out message would show the function of the button or the slider.
Music Manager The built-in music manager helps you arrange your multi-media data in a well-organized fashion. Starts the Music Manager Drag and drop to create the playlists Shows the connected media device Locates your media files Shows your playlists Displays your collection Shows the track playing, newest albums and favorite albums Connect your iPod to your Eee PC and click the Media Device tab to show the playlists in your iPod.
Photo Manager Manage, view, and edit image files with the Photo Manager. Starts the Photo Manager Preview pane Locates pictures in folders Adds your comments Displays folders and files Photo Manager supports image files in PNG, JPG, TIF, TIFF, GIF, BMP, XPM, PPM, PNM, XCT, PCX format.
Video Manager Starts the Video Manager Moves the selected item to trash can Shows the properties of the selected item Switches to tree display Changes the display window Changes the view mode ASUS Eee PC supports video and audio files in the following format: wmv, DVD, MPEG1, MPEG2, MPEG4 SP, Xvid, mp3, wma, ogg, wav, MPEG4 AAC, PCM, Dolby digital (2.0 decode) format. The actual supported codecs vary depending on model. Webcam (optional) Click Webcam and start video recording or image capture.
Sound Recorder Allows you to record a sound clip. Initiates Sound Recorder Switches to new buffer Starts recording Stops recording Playback Review Advance Turns on/off monitor Games Select an available game and have fun.
Settings Anti-Virus From the Settings tab, select Anti-Virus and perform virus scanning to protect your Eee PC. Click to start the anti-virus application Volume Click the speakers icon to open the control panel. Adjust the system volume and balance by moving the sliders.
Instant Shutdown Click Instant Shutdown and select an action from the dialog box shown below. You can activate the task manager, put the system in standby, restart, or shut down the system. Printers To setup your printer, double-click Printers and press Add to add a new printer. The installed printers display in the window. Refer to the QVL in Appendix or visit our website for the latest qualified vendor for the printers.
System Info This option displays the system information of your Eee PC. The displayed system information differs depending on model. Date & Time Adjusts the system date and time of your Eee PC.
Personalization Select Personalization to renew your information or change your preferences. Add/Remove Software You can download and install software from our server with network access. Follow the instructions below to install software. You can remove the software you install from our server later when they are no longer needed. Removing the pre-installed software is not allowed. To install new software or update the existing software: 1. 2. 3. 4. Make sure you have connected to network.
4-40 5. Click OK to confirm the installation/update. 6. Your Eee PC starts the download and installs/updates the selected software from our server.. 7. Click Yes to restart the system for the installed/updated application to work properly.
BIOS update To update the BIOS: DO NOT shut down or reset the system or unplug the power cord while updating the BIOS! Doing so would cause the system boot failure! 1. 2. 3. 4. Ensure you are connected to a network. Go to Settings > Add/Remove Software. Click the Settings tab on the top to switch the category. Click the Open button in BIOS Updates Click to switch the category 3 4 5. Click to display the available BIOS updates Locate the latest BIOS and click the Install button to update the BIOS.
5. Click OK to reboot and update the BIOS. Touchpad Edit your touchpad preferences by clicking Touchpad. You can adjust touchpad sensitivity, tapping time, and scrolling settings. Disk Utility Selecting Disk Utility allows you to check your Eee PC SSD condition including total disk space, the used space, and the remaining space. Click the tabs to switch the displayed disk drive.
Diagnostic Tools The Diagnostic Tool helps you with easy trouble-shooting. System Info. Click the System Info. button on the left to display the system information. Click to switch between system information summary and details The system information varies depending on model. System Test Click the System Test button on the left to start the system checkup. Select the item you want to test and follow the wizard to complete the test.
Send Log If you can't find a solution to your problem after the system test, you can click Send Log on the left to send the test log to ASUS support team. Our technical personnel would help you with the problems. Before you send the log, remember to set up your e-mail account in the Mozilla Thunderbird client first. Refer to page 4-23 for details. Desktop Mode The Desktop Mode allows you to select the display mode and adjust your Eee PC display resolution.
Voice Command Operate your Eee PC hands-free. With voice command, you can launch Eee PC utilities without utilizing the keyboard. Just let your lips do the service. Follow the instructions below to use voice command: 1. 2. 3. Double-click VoiceCommand from the Settings tab. Right click the voice command icon on the OS taskbar and toggle Enable to activate this function. The items on the list are available for voice command function. Add "computer" before each command.
Task Manager The Task Manager displays the application processes. Tweak your Eee PC up if it is running slow by killing the application with Task Manager. Follow the instructions below to teminate applications: 1. Double click the SOS icon running applications. Or, press 2. + on the OS taskbar to display the ( + ) directly to launch Task Manager. Select an unnecessary application that uses the system resources and click Kill to teminate the process.
Favorites Customize your favorites on the Favorites tab. Click Customize and start to add or remove your favorites. From the available favorites list in the left pane, select a desired item to include in your favorites, and click Add. To remove a favorite from your current favorites list, select an item from the right pane and click Remove.
4-48 Chapter 4: Using the Eee PC
Preparing to Install Windows® XP Installing Windows® XP Optimizing Windows® XP 5 Installing & Optimizing Windows® XP
Preparing to install Windows® XP Before installing Windows® XP operating system to your Eee PC, you need the following items. • • • • A USB 2.0 DVD-ROM The official Windows® XP Service Pack 2 disc from Microsoft® A USB flash disk (size larger than 1GB) or external hard disk drive ASUS Eee PC support DVD • The older version of Windows® OS does not support USB DVDROM. Ensure the disc you have is Windows® XP Service Pack 2. • Your Eee PC might not be able to detect all the USB flash disks.
6. Press on bootup and the Please select boot device screen appears. Select USB:XXXXXX (may be labled as the ODD brand name) to boot from the optical drive. Please select boot device: HDD:SM-SILICONMOTION SM223AC USB:Slimtype DVD ↑ and ↓ to move selection ENTER to select boot device 7. After the Windows® XP installation screen appears. Delete any existing partitions. You will lose all your data after deleting all existing disk partitions.
Optimizing Windows® XP For the best performance of your Eee PC with Windows XP operating system, follow some quick steps below to make your Eee PC run faster. Changing Virtual Memory ASUS Eee PC supprt DVD will by default set the virtual memory to 200MB. Change the virtual memory based on your needs. 5- 1. 2. Go to Control Panel > System. Click the Advanced tab on the top and click the Settings button in Performance area. 3. Click Advanced tab and the Change button to change the virtual memory.
4. Enter the Initial size and the Maximum size based on your needs. If you are unsure about the size, set both Initial and Maximum size to 256 MB. Turning off System Restore Though System Restore can track and reverse changes to your computer, it consumes system resources. Follow the instructions to turn off System Restore. 1. 2. 3. Go to Control Panel > System. Click System Restore tab on the top. Click the box before Turn off System Restore.
Compressing Disk Drive 1. 2. 3. Go to Control Panel > My Computer. Right-click Local Disk (C:) and select Properties. Check the box before Compress drive to save disk space. • • If an error message appears during the disk drive compression, select Skip All. The disk drive capacity varies depending on model. Relocating Files My Documents 1. 2. 3. 5- Click Start, right-click My Documents and select Properties. Click Move and select a destination in another partition. Click OK to relocate My Documents.
IE Temporary Internet Files 1. 2. 3. 4. 5. Launch Internet Explorer. Click Tools on the top and select Internet Options. Click Settings in Temporary Internet files area. Click Move Folders and select a destination in another partition. Click OK to relocate Temporary Internet Files.
Deleting unnecessary Windows Components 1. 2. 3. Go to Control Panel > Add or Remove Programs. Click Add/Remove Windows Components on the left to display the component wizard. Uncheck the boxes for the Windows components you do not need. Clearing System Backup Data 1. 2. 3. 5- Go to All Programs > Accessories > Command Prompt. Key in sfc.exe/purgecache. Press to clear the system backup data.
Deleting unnecessary document files 1. 2. 3. Go to Start > My Computer. Click Tools on the top and select Folder Options. Click the View tab. Toggle the option Show hidden files and folders, and unselect Hide protected operating system files (Recommended). 4. Connect a USB flash disk (size larger than 1GB) or a USB hard disk drive to your Eee PC for to back up the files you want to delete. Refer to the table on the next page for the system files you can delete.
Directory Media sample files Windows\System32 Windows\Web\Wallpaper File/Folder name Logon.scr and other *.scr files Ascent.jpg and other *.jpg files Documents and Settings\All Shared Music, Shared Pictures, Users\Document Shared Video System Tutoring and Help Files Windows\Help All files Unused Driver Files Windows\System32\Dllcache All files Windows Service Pack 2 and Hot Fix Files Windows\ KB*.
Support DVD System Recovery 6 Support DVD & System Recovery
Support DVD information The support DVD that comes with the Eee PC package contains the drivers, software applications, and utilities that you can install to avail all the features. All the following screens appear only in the Windows® XP SP2 environment. Running the support DVD Insert the support DVD in the external optical drive. The DVD automatically displays the Drivers menu if Autorun is enabled in your computer.
Drivers menu The Drivers menu shows available device drivers when the system detects installed devices. Install the necessary drivers to activate the devices. InstAll - Drivers Installation Wizard Installs all the drivers. ASUS ACPI Driver and Utility Installs ASUS ACPI driver before all the drivers if you are not using InstAll Wizard. Intel(R) Chipset Inf Update Program Installs Intel® Chipset Inf update program. Realtek Audio Driver Installs the Realtek® audio driver.
Utilities menu The Utilities menu shows the applications that the Eee PC supports. InstAll - Installation Wizard for Utilities Installs all the utilities. ADOBE Acrobat Reader V7.0 Installs the Adobe® Acrobat® Reader that allows you to open, view, and print documents in Portable Document Format (PDF). Atheros Ethernet Utility Installs Atheros Ethernet utility. ASUS Update The ASUS Update utility allows you to update the Eee PC BIOS in the Windows® environment.
Manual The Manual menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening a user manual file. Contact Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide.
Other information The icons on the top right corner of the screen provide additional information on the Eee PC and the contents of the support DVD. Click an icon to display the specified information.
System Recovery There are three ways to perform the system recovery. Refer to the following sections for details. The OS image file bundled in the support DVD may be not the latest version. After the system recovery, use the Add/Remove Software in the Settings tab to update your OS. You will lose all your data during the system recovery. Ensure to back up your important data before recovering your system. Using Hidden Partition 1. Hold during bootup (requires a Recovery Partition).
Using the Support DVD 1. 2. 3. 4. 5. Connect an external DVD optical drive to your Eee PC and insert the Support DVD into the optical drive (System needs to be powered ON). Restart the system and press on bootup to enter the BIOS setup. Go to Boot > Boot Device Priority and select the optical drive (may be labeled as “USB: DVD”) as the 1st Boot Device. Press to save the configuration and reboot from the Support DVD.
2. Click Utilities on the left and select ASUS Linux USB Flash Utility. 3. Select Copy EEE PC image files to USB flash and make it bootable and click Run. Note that the disk for Eee PC recovery is correct if you have several USB flash disks connected to the PC.
6-10 4. Click Yes to continue. The system starts formating your USB flash disk. 5. A dialog box appears. Follow the instructions to eject the USB disk and replug it to your PC/NB. Click Retry to continue. 6. Click OK to complete the process.
7. 8. Connect the USB flash disk to your Eee PC. Start the system and press on bootup to enter the BIOS setup. Go to Boot > Hard Disk Drives and select the USB drive (may be labeled as “USB:XXXX”) as the 1st Drive. 9. Go to Boot > Boot Device Priority and select the USB drive (may be labeled as “USB:XXXX”) as the 1st Boot Device. 10 Press to save the configuration and reboot from the USB flash disk. 11. Key in yes and press to continue the system recovery.
6-12 Chapter 6: Support DVD & System Recovery
Trademark Statements Qualified Vendor List Declarations and Safety Statements GNU General Public License Copyright Information Limitation of Liability Service and Support A Appendix
Trademark Statements Google Talk service and its logos are trademarks of Google Inc.. GroupWise service and its logos are trademarks of Novell Inc.. MSN service and its logos are trademarks of Microsoft Corporation. QQ service and its logos are trademarks of Tencent Inc.. Yahoo! service and its logos are trademarks of Yahoo! Inc.. All other services and logos are either trademarks or registered trademarks of their respective owners.
Qualified Vendor List Device Display Device Floppy Flash Memory Card Reader/Writer Flash Memory Card ASUS Eee PC Model AOC 716SW AOC L154W ASUS PW191 ASUS MB19 ASUS PW201 BenQ FP94VW BenQ FP222WH Samsung 203B Samsung 226BW Samsung SyncMaster 740BF Sony KLV46X200A ViewSonic VA1912wb ViewSonic VE710b ViewSonic VG712S Mitsumi D353FUE IBM CN533 ASIA All in 1 Card Reader GL816 6in1 Card Reader Kawau Card Reader SSK All in 1 Card Reader Transcend TS2GSDC 4.
Fast Ethernet ALPHA-AFH-805T Unmanaged Switch/Hub ALPHA-AFH-808T TP-LINK TL-HP5MU Adapter ASUS GIGAX1105N ASUS GIGAX1108N D-Link DES-1008D LINKSYS SD208 NETGEAR FS608 D-Link Di-704P D-Link Di-604+ Wireless Lan Access D-Link DI 624 Buffalo WZR-G300N Point D-Link DIR-635 ASUS WL500G ASUS WL520G ASUS WL566GM ASUS WL 530G Netcore 615GR Linksys WRT300N HUB BELKIN-F5U237 FEATARES-USB2.
External USB DVD drive Projector Monitor and TV Sony DRX-820UL Taidian DWB8PUM Sony DRX-S50U Xbox HD DVD Pioneer DVR-112CH BenQ TW200D BenQ EW164B-0K2 ASUS SDRW-0804P-D Dell 3400MP Toshiba S8 Acer AL1916W AOC 210V ASUS PW191 ASUS MM19T ASUS PW201 ASUS MW221U BenQ DV2680 BenQ FP22W CHIMEI CMV937A Dell FP2407FWP Hannsg GF191 Mozo M7++ Philips 170B5 Philips 190B6 Philips 32PF7320 PSA PD711A Samsung 225MS Samsung 940B Sony KDL-26S2020 ViewSonic G90f+ ViewSonic P70F ViewSonic PF775 ViewSonic PF790 ViewSonic N3
Declarations and Safety Statements Internal Modem Compliancy The Eee PC with internal modem model complies with JATE (Japan), FCC (US, Canada, Korea, Taiwan), and CTR21. The internal modem has been approved in accordance with Council Decision 98/482/EC for pan-European single terminal connection to the public switched telephone network (PSTN).
Network Compatibility Declaration Statement to be made by the manufacturer to the user: “This declaration will indicate the networks with which the equipment is designed to work and any notified networks with which the equipment may have inter-working difficulties. The manufacturer shall also associate a statement to make it clear where network compatibility is dependent on physical and software switch settings.
Internal Modem Compliancy (Cont.) This table shows the countries currently under the CTR21 standard.
This information was copied from CETECOM and is supplied without liability. For updates to this table, you may visit http://www.cetecom. de/technologies/ctr_21.html 1 National requirements will apply only if the equipment may use pulse dialling (manufacturers may state in the user guide that the equipment is only intended to support DTMF signalling, which would make any additional testing superfluous). In The Netherlands additional testing is required for series connection and caller ID facilities.
Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.
(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.) FCC Radio Frequency Interference Requirements This device is restricted to INDOOR USE due to its operation in the 5.15 to 5.25GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.
Declaration of Conformity (R&TTE directive 1999/5/EC) The following items were completed and are considered relevant and sufficient: • • • • • • • • Essential requirements as in [Article 3] Protection requirements for health and safety as in [Article 3.1a] Testing for electric safety according to [EN 60950] Protection requirements for electromagnetic compatibility in [Article 3.
To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz, these radars could cause interference and/or damage to license exempt LAN devices.
Wireless Operation Channel for Different Domains N. America 2.412-2.462 GHz Ch01 through CH11 Japan 2.412-2.484 GHz Ch01 through Ch14 Europe ETSI 2.412-2.472 GHz Ch01 through Ch13 France Restricted Wireless Frequency Bands Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) 100mW for frequencies between 2446.5 MHz and 2483.
60 64 68 71 82 89 94 Oise 61 Orne Pyrénées Atlantique 66 Haut Rhin 70 Saône et Loire 75 Tarn et Garonne 84 Yonne 90 Val de Marne 63 Puy du Dôme Pyrénées 67 Bas Rhin Haute Saône Paris Vaucluse 88 Vosges Territoire de Belfort This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr) Your WLAN Card transmits less than 100mW, but more than 10mW.
UL Safety Notices Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the National Electrical Code (NFPA 70).
Power Safety Requirement Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2. This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercurycontaining button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
Nordic Lithium Cautions (for lithium-ion batteries) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English) ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente.
CTR 21 Approval (for Eee PC with built-in Modem) Danish Dutch English Finnish French German Greek Italian Portuguese ASUS Eee PC A-19
Spanish Swedish A-20 Appendix
GNU General Public License Licensing Information This product includes copyrighted third-party software licensed under the terms of the GNU General Public License. See The GNU General Public License for the exact terms and conditions of this license.
GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items-whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc.
Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Limitation of Liability Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS.
A-34 Appendix
