E3556 Windows® XP Edition Quick Use Guide Eee PC 8G Eee PC 4G(701) Eee PC 4G(Surf) 15G06Q010000
Powering on your Eee PC These are only quick instructions for using your Eee PC. Read the full manual for detailed information. 1 1. Install the battery pack 2. Connect the AC power adapter 2 1 2 3. Turn ON the Eee PC 1 3 When you open the display panel, do not force it down to the table or else the hinges may break! Never lift the Eee PC by the display panel! Remember to fully charge the battery before first use and whenever it is depleted to prolong battery life.
Powering off your Eee PC Do the following instructions to turn down your Eee PC. 1. 2. Click the start button on the bottom left corner of the desktop to display the start menu. Select Turn Off Computer from the list. 2 1 3. Select Turn Off to power off your Eee PC.
Launching for the First Time For the first time you start your Eee PC, the Windows wizard will launch automatically and lead you through setting up your preferences and some basic information. Follow the wizard instructions to finish the initialization. Configuring a network connection Wireless Network Connection 1. Double-click the crossed wireless network icon taskbar. on the OS If the wireless connection icon does not show on the taskbar.
3. When connecting, you may have to enter a password. 4. After a connection has been established, the connection is shown on the list. 5. You can see the wireless network icon on the OS taskbar. The wireless connection icon disappears when you press ( + ) to disable the WLAN function.
Local Area Network If you want to obtain network access, connect the network cable, with RJ-45 connectors on each end, to the network port on the Eee PC and the other end to a hub or switch. The illustration below is the example of your Eee PC connected to a network hub or switch for use with the built-in Ethernet controller. Connect to network before enjoying all the network services and functions in Eee PC. Using a dynamic IP: 1.
4. Toggle the first option Obtain an IP address automatically and click OK to finish the configuration. Using a static IP: 1. Repeat the step 1~3 of Using a dynamic IP to start the static IP network configuraton. 2 Toggle the second option Use the following IP address.
3. 4. 5. Enter the IP address, Subnet mask and Gateway from your service provider. There is no need to enter the DNS address unless you want to override the server provided DNS server address. If so, enter the preferred DNS Server address, alternative address. Click the OK button on the bottom to build the network connection. Contact your service provider if you have problem connecting to the internet.
