DU3951 Snelstartgids 15G06Q0380C0
Uw Eee PC inschakelen 2 Dit zijn enkele beknopte instructies voor het gebruik van uw EeePC. Lees de uitgebreide handleiding voor gedetailleerde informatie. 1 3 1. Installeer de batterij 2. Sluit de wissel stroom adapter aan 3 1 2 3. Schakel de Eee PC in 1.3 De Eee PC kan beschadigd worden als u een andere adapter gebruikt om de Eee PC in te schakelen. U kunt uw batterij en de Eee PC beschadigen als u een defecte wisselstroom/ gelijkstroomadapter gebruikt.
Uw Eee PC uitschakelen Voer de volgende instructies uit om uw Eee PC uit te schakelen. A. 1. 2. 3. Klik in het systeemvak op de rode voedingsschakelaar Of klik op Onmiddellijk uitschakelen op het tabblad Instellingen en selecteer Afsluiten. Selecteer Uitschakelen in het dialoogvenster. Selecteer OK om door te gaan. . 1 2 3 1 B. U kunt ook rechtstreeks op de voedingsschakelaar op de Eee PC drukken en de voorgaande instructies volgen om uw Eee PC uit te schakelen.
De wizard Eerste uitvoering starten Als u de Eee PC voor de eerste keer start, wordt de wizard Eerste uitvoering automatisch gestart. Deze wizard zal u begeleiden bij het instellen van uw voorkeuren en biedt u wat basisinformatie. Volg de instructies van de wizard om de eerste instellingen te voltooien. 1. Selecteer Ik accepteer deze overeenkomst en klik daarna op Volgende om door te gaan. 2. Voer uw Gebruikersnaam in. Klik op Volgende om door te gaan. 3.
Een netwerkverbinding configureren Draadloze netwerkverbinding 1. Controleer of de functie Draadloos LAN is ingeschakeld. Activeer de draadloze LAN-functie door op + ( + ) te drukken voordat u een draadloze netwerkverbinding configureert indien dat nodig is. 2. Klik op Draadloze netwerken op het tabblad Internet. 3. Selecteer het draadloze toegangspunt waarmee u een verbinding wilt maken in de lijst en klik op Verbinden om de verbinding tot stand te brengen.
LAN-netwerk Een dynamisch IP-adres gebruiken: 1. Selecteer op het tabblad Internet het item Netwerk om de configuratie te starten. 2. Klik op Maken om een 3. netwerkverbinding tot stand te brengen. Selecteer het type verbinding dat u gebruikt en klik op Volgende. 4. Selecteer de hardware die 5. u wilt gebruiken om uw verbinding te maken en klik op Volgende. Schakel de eerste optie Dynamisch IP-adres (DHCP) in en klik op Volgende. 6. 7. Voer een naam in voor deze verbinding en klik op Volgende.
Point-to-Point Protocol over Ethernet (PPPoE) 1. Herhaal stappen 1 en 2 van Een statisch IP-adres gebruiken om de PPPoE netwerkconfiguratie te starten. 2. Selecteer het type verbinding 3. dat u gebruikt en klik op Volgende. Selecteer de hardware die u wilt gebruiken om uw verbinding te maken en klik op Volgende. 4. Voer uw gebruikersnaam en wachtwoord in en klik op Volgende. Voer een naam in voor deze verbinding en klik op Volgende. 5. 6.
Snelstartgids -